| Author | Message | ||
     Alessio66xb12r |
i made a " h-p reverso" style home made muffler that with race ecm and open air box was running too lean to fix that i was turning around direct link , tfi or power commander , and last the new rapid bike . finally i get the rapid bike that i think is very similar with direct link like software so...the muffler does'nt works , there is no way to find a good map for that but when i mounted back the buell race muffler again after modify some maps (the maps coming with the software are always to quite and similar to the original one) .......it seems a turbo charged bike . i'm really pleasured by this stuff , its pretty easy to use ( not like tfi of course) and you can do the tps reset also . if somebody else has this, other informations are welcome | ||
| Alessio66xb12r |
i missed "rapid bike" module in the usa its from tecnoresearch . take a look and tell me what you think about. bye to all Alessio | ||
| Blake |
Sounds to me like your "Rapid Bike" system is the same product as the "Direct Link" system by Techno Research. Is that your conclusion? | ||
| Al_lighton |
They are very different, but technoresearch handles both. Rapidbike is an in-between box solution a la power commander, Directlink is a direct ECM programmer. Al | ||
| Alessio66xb12r |
to Al please explain me , my conclusion is : with direct link i remap my original ecm doing a different fueling and a different sparks timing , i can adding or subtract fuel in this or that step ( rpm and throttle position) , i can advance or retard spark time in this or that step to , is it correct ?? with rapid bike i'm doing the same with the difference that i'm not working on the original ecm but in another one , like you say , between the original one and the bike final functions , is it correct ?? I want you know ...i like engines since ever and for sure i like H.D.and BUELL but its not my job "SIGH" .... i' m just try to learn more reading and asking around when i can , and spending a great part of my small free time in the garage (my wife is really not happy because of this). So if you can let me know somethings about ex. ? ? whats the limit of timing to stay between to make no damages to the engines rapid bike timing start from zero , zero means the original mapping of the original ecm and you can add or subtract 0,5 degrees each position . Maps( regarding time) for xb that comes with the rapid bike are always no more of 2,5 degrees from the original zero , maximum , and only around midrange rpms at 80% full throttle opening . In any case Thank you and to all very much Alessio |
