| Author | Message | ||
     Pcmodeler |
Does anyone have the pattern/cutout or even some good pictures of the wood adapters you make for lifting the Buell up on a bike jack. Similar to the ones in this thread: http://www.badweatherbikers.com/buell/messages/32777/146589.html Also, it appears that stand is lowered all the way. So, if you don't have a pit bull/etc. How can you get the stand under the bike with the wood adapters attached to the lift? | ||
| U4euh |
Send me your address and I'll send you a template, that is if no one can email them to you. A fellow Bueller made two sets and gave me a pair. As far as the jack, you don't mount the wood pieces. Slide the jack under bike, slide the pieces in from the front and back of muffler, then lift. Once you make contact, straighten her up on the wood inserts and secure the bike. | ||
| Tank_bueller |
I made one a while back....here's a link to the post: http://www.badweatherbikers.com/buell/messages/32777/150337.html It isn't made for a bike jack, but it works for me. (Message edited by tank_bueller on May 08, 2006) | ||
| Pcmodeler |
That works. Thanks. |
