Author |
Message |
G4string
| Posted on Wednesday, April 12, 2006 - 04:47 pm: |
|
I want to check the torque on the flywheel bolt and inspect the chain. So, I need to pull the primary cover. I looked at it today and it seems that all I have to do is drain the oil, pull the clutch lever, and then pull the primary cover off. Is that all? I am going to go get the gaskets from HD today, but I want to make sure what I am getting myself into before I start this job. Please let me know if there is anything weird or difficult about puling the clutch lever or primary case cover. Thanks, you guys rock!!!!! |
Peanut_man
| Posted on Wednesday, April 12, 2006 - 04:51 pm: |
|
I have exactly same question, actually. |
Brookz
| Posted on Wednesday, April 12, 2006 - 04:54 pm: |
|
Nothing too complicated about it. Just make sure when you are taking off the clutch cable assembly that you back off the screw within the nut. I got hung up on this on my sportster and I hope you don't do the same. |
99buellx1
| Posted on Wednesday, April 12, 2006 - 04:58 pm: |
|
While you are there getting the gaskets pick up the Service Manual. It really is worth it. |
|