Author |
Message |
Blackbelt
| Posted on Thursday, July 25, 2002 - 11:51 am: |
|
cool. well i will have to get the ECM. Just one thing. how Much time in the shop is involved to get the Scanalizer all set and ready? just curious |
Spiderman
| Posted on Thursday, July 25, 2002 - 04:17 pm: |
|
ecm is a quick 1 min job. I might be able to borrow the scanalizer from my shop and do it in my garage. But other than that you would have to call for a price and appointment on that. If you call ask for Mike Shute in the service dept. |
Ccryder
| Posted on Thursday, July 25, 2002 - 07:54 pm: |
|
Spiderman: The TPS reset is not that difficult, but not a 1 min. job! A qualified Tech should be able to perform it in less than 10 min. This is the way by the One in the "know": How to zero the TPS in two minutes or less (not counting warm up time). 1. Connect scan tool 2. Select #3 Data monitor 3. Scroll down to "TP degrees" 4. Back off idle adjuster until TP degrees reading stops decreasing 5. Turn idle adjuster one more full turn out 6. Snap throttle closed to seat the throttle plate 7. Press mode on the scan tool and select option #7 "Calibrations" 8. Select #2 "TPS zero function" 9. Press "Enter", then "Option #3" on the scan tool 10. Scoll down to "TP Degrees", adjust idle speed screw until TP degrees read "5.8 o" 11. Press start button and start bike. Warm up to 280oF engine temperature. 12. Adjust idle speed to 1050 RPM. NO MORE and NO LESS. Please post the name of any dealer that wants more than 0.1 hours for doing this so people know who to stay away from. So borrow the Scanalizer and the Buell module and take care of the Buelligan. Later Neil S. |
Spiderman
| Posted on Thursday, July 25, 2002 - 11:44 pm: |
|
Yeah i know i have done it in my garage in less than two Min. With the bike fully warmed up ask Vertigo. I have done his bike and many others on this board (American Chapter) |
Blackbelt
| Posted on Friday, July 26, 2002 - 09:22 am: |
|
sweet, now all i need to do is get the ECM... hehehe time to talk to the wife (the financical wizard) hehehe |
Blackbelt
| Posted on Friday, July 26, 2002 - 11:47 am: |
|
hay spidy, What time are the meetings at hooters on monday? just curious cause i work not 10 miles from there... i am in downtown birmingham. so i can stop on by every now and then..... let me know the time please. adam |
Spiderman
| Posted on Friday, July 26, 2002 - 12:31 pm: |
|
We meet at Hooters in Taylor at 7:00 give or take a few just ask one of the girls where Tony is and they'll let ya know |
Blackbelt
| Posted on Friday, July 26, 2002 - 03:31 pm: |
|
must be nice knowing that all those beautiful women know your name.. hehehe.... kwel see ya there |
Spiderman
| Posted on Friday, July 26, 2002 - 07:48 pm: |
|
Well we just got back from Milan. Every one had a good time a definate repete will happen. I broke my front motor mount when we just dickin around racing each other, soooo i didn't even get a read out of my time. Ahhhhhh well i'm pretty sure we'll be back. |
Darthane
| Posted on Friday, July 26, 2002 - 08:25 pm: |
|
Best picture from the track - All lined up before our first runs. Bryan |
Darthane
| Posted on Friday, July 26, 2002 - 08:27 pm: |
|
Let's try that again - Bryan |
Spiderman
| Posted on Saturday, July 27, 2002 - 10:45 am: |
|
Well i'm sitting here at work hazy from last night. The group took me out for drinks after my bike broke, i think, no i know that we have the best BRAG group!! Thanks Joe |
Darthane
| Posted on Saturday, July 27, 2002 - 10:57 am: |
|
LOL...yeah, you were just a little tipsy last night. And you don't even remember spilling Kool-Aid all over the couch. ;-) Man, though that was $h1tlo@d$ of fun last night at the track and then dinner and drinks. Definitely a keeper BRAG event. Bryan |
Vertigo690
| Posted on Monday, July 29, 2002 - 08:30 am: |
|
Hey hey hey! Lets see more of the pics from the race track!!!! And yes Tony was able to reset my TPS in his garage....thanks Tony!!!! And yes Tony was trashed....drowning his sorrows in nasty shots and beer after breaking his bike at the track. I hope it gets running soon.... |
Spiderman
| Posted on Monday, July 29, 2002 - 09:46 am: |
|
|
Blackbelt
| Posted on Monday, July 29, 2002 - 11:01 am: |
|
nice icon tony.... hay i hate to say it but i am not going to make it to Hooters tonight :-( i am bummed... but when you are re-building an old farm house and rain is in the forcast the roof must be worked on or the wife gets pissed.... how did you break the motor mount.... damn that takes talent...hehehe talk to everyone later. |
Spiderman
| Posted on Monday, July 29, 2002 - 11:25 am: |
|
Cool i don't think any of us are going so it all works out. Lot of talent baby loads of it. |
Blackbelt
| Posted on Monday, July 29, 2002 - 01:05 pm: |
|
hay just thought i would let you know, i got ahold of a K&N kit for my X-1 for a really good price, so that is one of three parts off my list so far... hopefully the ECM and Muffler arn't too far off.. |
Spiderman
| Posted on Monday, July 29, 2002 - 01:29 pm: |
|
well we have the ECM in stock if you need one. |
Blackbelt
| Posted on Friday, August 02, 2002 - 07:12 am: |
|
hay spidey, I am thinking about getting a trip to the deals Gap next season.. I know a couple people that will probably go, i wasn't too sure if you wanted to post it with the other Brag events for the Ann Arbor chapter or what... i figure the more, the marrier... know what i mean... Oh and i will get the ECM when the BOSS (wife) allows me to get the check book.. hehehe |