| Author | Message | ||
     Ingemar |
So we got some hardcore hardware gurus here or what? I'm having some lousy problems with new hardware and I can't get it to run stable. If you wanna help with megaherzes, latency timings and sideband addressing issues, please help a brother out and ping me. If you wanna read what is going on please check here. Not at all motorcycle related, but I know there are some very knowledgeable people here. Thanks guys! Ingemar. | ||
| Boese |
 although I would not really call myself a guru, i am one step to water and/or compressor cooling my stuff.... either IM me at 100676537 with your questions or come here and ask : www.silenthardware.de/forum/ | ||
| Boese |
http://www.silenthardware.de/forum/index.php?showtopic=7570&st=525# one of my reviews on how to get 400€ performance out of a 240€ part (warranty will be voided) unlocked all pixel pipelines and all vertex shader units .... | ||
| Boese |
 you need the black ones.... will reply to your problem later, just flew over it. | ||
| Boese |
seems like your parts constellation is not correct. you cannot mix & match too much in this business. | ||
| Ingemar |
Hey, thanks Boese. I never expected to find such a quick solution, but I ran into a website that is dedicated to Nforce2 chipsets and they solved the problem with a modded BIOS that has the L12 bridges set (helps 200Mhz bus speeds) and CPC set to ON (Command Per Clock). From what I understand of it all (which is not much) CPC causes memory to run slower because of strickter timing settings, but allows a higher bus clock (200Mhz and above). Without it, my PC3200 memory wouldn't even run on 180Mhz on this particular board. Thanks again, Ingemar. | ||
| Wyckedflesh |
hey Ingemar, how about that link since I run a Nforce2 board (DFI N400II) with a Barton AMD2600Athlon 333mhz FSB and 1gig PC3200DDR Crucial Ram. Right now I can not make any speed adjustments nor run the optimized Bios settings without it locking on boot up. Right now it benchmarks at 960mhz operational speed. Scratch that, found your links in the other forum  (Message edited by wyckedflesh on April 28, 2005) | ||
| Ingemar |
Not quite. These are the correct links: http://forums.pcper.com/showthread.php?s=de843f1d2592c55ec0af768656bfb4ba&t=3523 26&page=1&pp=15 http://www.houseofmobos.com/forum/showthread.php?t=728&page=4&pp=15 Note however that most of it is aimed directly at the Asus A7N8X-E DLX mainboards. Some of the memory tweaks may apply to your board as well. With sufficent cooling your CPU should be able to run at 10*200mhz. Try searching for a modded BIOS with L-12 and CPC (T2) enabled specifically for your mainboard. Nforce2 chipsets are known to have a problem addressing >512Mb memory modules. | ||
| Ray_maines |
All that freakin' smarts and he can't post a picture that fits on my screen................ Scheech! | ||
| Rek |
Boese, I see you like nekid 'puters as well as nekid bikes... Rob | ||
| Boese |
@ray that is because your screen is too small !! :-) @rek wait till i come up with a liquid cooling solution, then it will look like a buell header coming out of there :-) good you found a solution ingemar, as always google is your best friend :-) |
