| Author |
Message |
    
Norrisperformance
| | Posted on Monday, February 28, 2005 - 04:26 pm: | 
|
Hey Tatsu
Heres a picture from a different angle.
It does'nt blow on the tensioner.
 |
Dago
| | Posted on Monday, February 28, 2005 - 04:38 pm: |
|
Excellent question Tatsu. Continuing his question...
Will the exhaust heat have any adverse affects on the belt? |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 04:48 pm: |
|
Whats up Dago
I don,t think it will have any effect on
the belt. The bikes moving most of time
anyway and Buells race muffler exits on both
sides. |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 05:15 pm: |
|
I'll try to get the bikes on the dyno this
week, to see how the new drummer 12 performs.
It sure made an unbelievable difference in
power, it pulls a lot harder. I’ll post the data as soon as I get it. |
Enigma
| | Posted on Monday, February 28, 2005 - 06:46 pm: |
|
Hi Kev, just wanted to ask does the outlet have to face out the right and have you a price for a pipe to the uk.
Thanks E |
Kds1
| | Posted on Monday, February 28, 2005 - 07:12 pm: |
|
Enigma, You have mail!!!
www.kdfab.com |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 07:13 pm: |
|
Hey Enigma
I asked Kevin to face my outlet to the right
just to be different and to blow some noise
at the people I pass. |
Rubberdown
| | Posted on Monday, February 28, 2005 - 08:11 pm: |
|
In the spirit of compromise, I'll take two fatlets. One for each side. |
Kds1
| | Posted on Monday, February 28, 2005 - 09:01 pm: |
|
Two fatlets would be cool but a lot of work for no gain....
www.kdfab.com |
Okinawaxb12s
| | Posted on Monday, February 28, 2005 - 09:07 pm: |
|
i think i would like to have one with dual outlets also.would look cool i think.i'll take one please! |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 09:39 pm: |
|
Sometimes what looks great, does'nt perform great.
It's the same way with chicks. |
Rageonthedl
| | Posted on Monday, February 28, 2005 - 09:45 pm: |
|
I have a 12 muffler with only 200 miles on it im looking to get about $50 + shipping any one want it? |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 09:54 pm: |
|
Yes sir !!!!!!!!
Send it COD |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 10:12 pm: |
|
Hey Rageonthedl
You going to ship me the Drummer? |
Rageonthedl
| | Posted on Monday, February 28, 2005 - 10:22 pm: |
|
it is not a drummer it is the stock muffler, and i need $$ up front |
Norrisperformance
| | Posted on Monday, February 28, 2005 - 10:27 pm: |
|
I'll still take it, if you ship it COD.
I'll pay the COD charge.
Thanks |
Okinawaxb12s
| | Posted on Monday, February 28, 2005 - 11:55 pm: |
|
how much to get my stock muffler turned into one of yours?i got lucky,got 2 mufflers when i bought the bike.u.s. spec muffler brand new in the box,japan spec muffler on the bike.only difference is the jap. spec muffler goes straight out the back instead of the side. |
Okinawaxb12s
| | Posted on Tuesday, March 01, 2005 - 12:03 am: |
|
oh,and can i get a military discount? |
Kds1
| | Posted on Tuesday, March 01, 2005 - 09:41 am: |
|
Okinawaxb12s,
Send me your pipe and I'll fix it for ya.....
e-mail me offline and I'll get you the info...
I'll do yours for free if you get my loan paid up for me, OK ?????
www.kdfab.com |
Bobup
| | Posted on Tuesday, March 01, 2005 - 03:04 pm: |
|
back to the original subject...stainless steel
Kevin, are you going to make the 9 a stainless can as well? 
I would prefer it over the stock one |
Jerseyguy
| | Posted on Tuesday, March 01, 2005 - 03:41 pm: |
|
Bob,
The first one is a 9. I'm testing it on my bike against my original Drummer. I will be sending an O2 sensor bung to Kevin tomorrow (if FEDEX delivers it today) and then he will finish the prototype 9 can and send it to me. Hopefully the snow will be gone by next week so I can test. They will be dimensionally identical inside, so I think the results will be the same. I'm designing the chin spoiler brackets now in SolidWorks.
www.kdfab.com |
Norrisperformance
| | Posted on Tuesday, March 01, 2005 - 04:30 pm: |
|
Hey Jerseyguy
I'll have new style 12 on the dyno tomorrow
if everything goes ok. Anything special
I need to do.
Thanks Mike |
Jerseyguy
| | Posted on Tuesday, March 01, 2005 - 07:24 pm: |
|
Mike - Nope, just be fair and balanced.
One thing maybe, if you could record the A/F values along with HP & Torque, it may be a helpful comparison in the future. |
Norrisperformance
| | Posted on Tuesday, March 01, 2005 - 09:46 pm: |
|
Thanks Jerseyguy
I try to get a print out of the A/F values also. |
