G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ggggary Posted on Tuesday, April 09, 2019 - 11:04 am:        Anyone got a cross to a standard seal # for X0077.1B6 clutch cover oil seal? #31 in pic. Oil is pouring through mine. Or is there something I'm missing? There was corrosion, water intrusion into the diaphragm area, cleaned up everything polished the clutch release pin, oil seal is not even touching the pin all the way around, shrug. Looked harder, seal spring has rust not tight.   Ggggary Posted on Tuesday, April 09, 2019 - 11:31 am:        I'm coming up with type TC 20mm ID 35mm OD 7mm thick   Shoggin Posted on Tuesday, April 09, 2019 - 09:35 pm:        There should be a seal number printed on it. It's the size, just like bearings have.   Ggggary Posted on Tuesday, April 09, 2019 - 10:04 pm:        It wasn't marked and I went over it with a lighted magnifier. I measured 20mm x 35mm x 7mm of the TC cross section and that was confirmed by others, have a NAPA 27SS2172 on order, my closest source. Was told by a reliable source that Honda part # 91257-HB3-003 is correct also. Thanx, will report results.   Shoggin Posted on Tuesday, April 09, 2019 - 10:55 pm:        Please do! Thanks for the research Doesn't EBR have one for you?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: