| Author | Message | ||
     Zacks |
Looking for a trick or tip to get the right hand headlight connector plugged back in. | ||
| Skntpig |
Try carefully sniping zip ties until you have it free. Click it in and tidy it up with new ties. | ||
| Zacks |
That's the problem, can't get it clicked in. it's like it can't get lined up because the back end is blocked by the support bracket. | ||
| Zacks |
Probably should have started my question with this information included first: Trying to reinstall with minimal disassembly of the front end. After all, it came out that way. Finally gave up this afternoon and pulled the upper fairing off, then the 4 bolts holding the headlight assembly. Bada-bing, plugged it right in (was afraid a pin had been bent or something was causing the problem). Stitch it all back together and we're good to go. If I had just given in up front, I'd probably have been done faster - given all the time farting around trying to get it to go. So, that is my advice for anyone looking at this thread. | ||
| Pmjolly |
For track days, I just tape over my headlights. |
