G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ds_tiger Posted on Monday, June 27, 2016 - 04:21 pm:        I may have missed the point on the R6 throttle tube mod. I took it to understand the R6 throttle had less rotation to get you to WFO, and made the bike livelier based on given throttle input. Uh, they are exactly the same rotation angle to WFO. A little less than 90 degrees. The distance between the eyelets for the 2 cables on the throttle housing is the same and the R6 tube has a bit of additional plastic on the pull cable eyelet side- but it is flush with the tube body (not ramped)- so no additional "cam" effect. What did I miss as the benefit to this modification? first picture = EBR OEM closed second picture = EBR OEM WFO 3rd picture = R6 throttle tube installed and WFO 4 picture = R6 throttle tube (LEFT) compared to OEM EBR (RIGHT) (Message edited by ds tiger on June 27, 2016) (Message edited by ds tiger on June 27, 2016)   Imonabuss Posted on Monday, June 27, 2016 - 06:22 pm:        The question would be if there is a difference in the diameter of the drum where the cables run. A larger drum diameter will move the cable more for a given degree of rotation. If no difference, then there will be no quicker throttle.   Snacktoast Posted on Monday, June 27, 2016 - 08:31 pm:        Motion pro has/had a kit if youre looking to change the throttle rate   Terrys1980 Posted on Monday, June 27, 2016 - 09:08 pm:        Has to be 2006-2009 tube and what part number did you order? 2C0-26240-00-00?? That tube looks like one for the R6S and not the R6. http://www.partzilla.com/parts/detail/yamaha/YP-2C0-26240-00-00.html Also have a look at this. https://shop.strato.de/epages/63112045.sf/de_DE/?O bjectPath=/Shops/63112045/Products/PF-Bue-0019 (Message edited by terrys1980 on June 27, 2016)   Ds_tiger Posted on Monday, June 27, 2016 - 10:48 pm:        5SL-26240-01-00 - which looks like the 6R "S" version upon further inquiry. I bought it based on the suggestions of a frequent poster on the EBR 1190 Facebook page- one of the thread/ posts on the topic.... In any event- I ordered a Motion Pro set up. sux- but it's life on the internet, huh?! (Message edited by ds tiger on June 27, 2016) (Message edited by ds tiger on June 27, 2016) (Message edited by ds tiger on June 27, 2016)   Terrys1980 Posted on Monday, June 27, 2016 - 11:03 pm:        I'll see if I can find that post on Facebook...   Ds_tiger Posted on Monday, June 27, 2016 - 11:47 pm:        just checked FB and ^^ looks like you did! Thanks, man - gotta get the right info out there.   Ds_tiger Posted on Saturday, July 02, 2016 - 03:34 pm:        UPDATE part number 2C0-26240-00-00 this is what I was going for - THANKS Terrys1980!   Ds_tiger Posted on Saturday, July 02, 2016 - 03:50 pm:        (Message edited by ds tiger on July 02, 2016)   Terrys1980 Posted on Saturday, July 02, 2016 - 04:23 pm:        Sweet! Now you got me thinking about doing this mod..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: