Author |
Message |
Whodom
| Posted on Sunday, February 06, 2005 - 05:53 pm: |
|
I'd really appreciate it if someone with an S3 or S3T could post a photo of the front brake hose routing. I'm mainly interested in the area around the headstock- how the hose comes through the stainless steel wire/bracket, under the triple clamp and up to the master cylinder. I'm fairly sure the hose on my bike is not routed properly and/or the bracket is way out of position. The outer plastic covering on the brake hose has worn through where the hose rubs on the underside of the upper triple clamp. I'd like to correct the problem before it starts eating into the stainless steel braid. Thanks in Advance, Hugh |
Steve_mackay
| Posted on Monday, February 07, 2005 - 11:05 am: |
|
Whodom, if you can wait till this evening, I'll take some pics and post 'em for you. We have a pair of S3Ts. |
Whodom
| Posted on Monday, February 07, 2005 - 11:39 am: |
|
Hey Steve, Yea, that would be great. There's no rush at all. Post here or e-mail to whodom2001 [at] yahoo [dot] com; whatever's easier for you. Thanks! |
Buelliedan
| Posted on Monday, February 07, 2005 - 02:54 pm: |
|
Actually I remember the S3 I owned having the same problem and it was bought new. You just need to sit down on the milkcrate and figure out a better way to route it. |
|