G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kenb Posted on Wednesday, April 30, 2003 - 08:18 am:        does anybody know the thread pitch and size of the retainer nut that holds on the tripometer reset knob on the dashboard ? I know dumb question but mine flew off this morning and I want to stop at Lowes on the way home and rummage through their nut and bolt section. I'd guess 1/2 x 20.   Dynarider Posted on Wednesday, April 30, 2003 - 08:43 am:        3/8 X 24? Hell I dont have a frickin clue. Honestly I dont even remember what the reset button looks like, its been so long since I seen my bike.   Newfie_buell Posted on Wednesday, April 30, 2003 - 03:48 pm:        Ken, Just get someone to hold the doors open and ride the bike right up to the nut & bolt bin. You will get assistance almost immediately. Good Luck   Rick_a Posted on Wednesday, April 30, 2003 - 04:18 pm:        or just walk in and buy a thread pitch gauge and a ruler   Kenb Posted on Thursday, May 01, 2003 - 07:49 am:        Still don't know what pitch/size it is but I had one in my nut/bolt collection at home.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: