| Author |
Message |
    
Oldog
| | Posted on Thursday, February 24, 2005 - 12:21 pm: | 
|
ya-Baby!
bet you can get it on e-bay cheap!
a little toilet humor! |
Ocbueller
| | Posted on Thursday, February 24, 2005 - 07:57 pm: |
|
Didn't come out too bad. The All Seeing Eye is an addition I made.
SteveH |
Oldog
| | Posted on Friday, February 25, 2005 - 12:50 am: |
|
Steve:
! THAT LOOKS GREAT!
ash tray my but !
I will be gone for a li'l while I will check back
I won't have time to mess with mine for now
so it will just hang there in its glorified dustiness
that is just too nice!  |
Oldog
| | Posted on Friday, February 25, 2005 - 12:59 am: |
|
Tripp
hey where did the CF Poop Hoop come from?
thats tooooo much
 |
Tripp
| | Posted on Friday, February 25, 2005 - 01:13 am: |
|
lol, i got it from a motorcycle store
mcstorewebsite sad part is, i wanted one first time i saw it, hehe |
Ocbueller
| | Posted on Friday, February 25, 2005 - 05:24 pm: |
|
I have to have a CF toilet seat, do they make a matching CF tp holder? A regular tp holder probably would have difficulty keeping up.
SteveH |
Sleez
| | Posted on Friday, February 25, 2005 - 06:35 pm: |
|
you think that seat is cool? check this...
http://headhunterinc.com/carbon_fiber.htm |
Jersey_thunder
| | Posted on Friday, February 25, 2005 - 07:07 pm: |
|
OK..NOW I HAVE SEE EVERYTHING!!!
T |
Oldog
| | Posted on Friday, February 25, 2005 - 09:22 pm: |
|
FOTFALMAO!
The grail of carbon fiber users every where!
tank cover and seat take on new meanings
This is a new high in Toilet humor.
 |
Nitsebes
| | Posted on Tuesday, March 15, 2005 - 07:03 pm: |
|
Can anyone (insert COURT's name) make an S2 (Tank cover/tailpiece/fairing) out of the same CF they used to make the fender and and belt guard.Also what did this process entail? I spoke with a guy in NY who said he could make one but just needs to make a mold of it first.I'm sure if and when he see's the tank cover he will freak. I kind of like the green/gold look of the stock pieces.Also can the shine be brought back on the air cleaner cover by polishing? or would it need to go through the CF process again. |
Oldog
| | Posted on Wednesday, March 16, 2005 - 12:39 pm: |
|
ALL:
the "cheap" carbon is back on Evil Bay the quality and fit on some of this stuff is ??
be careful ....
also I have payed for parts from one firm and they went away, I got no parts net loss $125.00
if you decide to trade with these people
use pay pal to protect your self
bye for now
thanks one and all
(Message edited by oldog on March 16, 2005) |
Koz5150
| | Posted on Wednesday, March 16, 2005 - 07:42 pm: |
|
I had been looking at the pulley cover. I think I will pass, thanks for the info. |
Sleez
| | Posted on Wednesday, March 16, 2005 - 07:59 pm: |
|
tried to mount the rear fender i got, looks good, but missing a hole!! now have to drill it myself, hope it doesn't tear up??? checked the thickness compared to factory stuff, half as thick!! |
Oldog
| | Posted on Thursday, March 17, 2005 - 02:52 am: |
|
Sleez:
If you can get one a "UNI-Bit" or similar "step drill" works ok. Drilling will likely cause a surface blemish so using a button head screw or largeish washer will help. go easy and let the bit cut through, just before it breaks through ease up a bit more if you use a twist drill and it hangs up it may mess up your fender, if you know an electrician he will likely have a step drill. Oh and BTW thanks for the CF toilet link
I still laugh about that,
I took the dust catcher off the wall and took a saw and some files to it, it is now on the x1 with the cf lowers, at least for now
 |
Sleez
| | Posted on Thursday, March 17, 2005 - 01:43 pm: |
|
Oldog, thanks for the tip, i have access to many Uni-bits, should work ok. |
P0p0k0pf
| | Posted on Thursday, March 17, 2005 - 01:57 pm: |
|
BTW- putting tape over the spot you are drilling can help minimize surface splintering and cracking... |
Bluzm2
| | Posted on Thursday, March 17, 2005 - 02:10 pm: |
|
Also, using a brad point bit (usually used for wood) works well. The side spurs leave a clean hole.
When used in conjunction with tape, the holes are near perfect. |
Oldog
| | Posted on Thursday, March 17, 2005 - 02:27 pm: |
|
also what the guys said about tape sacrifical blocks and the brad point drill are all correct
good luck sleez, how a bout a snap of the finished job.
 |
Oldog
| | Posted on Thursday, March 17, 2005 - 02:36 pm: |
|
All:
latest in the no parts saga sent vendor a note,
one of many.
vendor sends back with some mess about lost in transit
no message was sent that the order was ever shipped we are beyond 45 days
any body have the e-mail for the CA Atourney generals office or their complaint line
I have notified E-bay of the problem no response as of yet |
Ocbueller
| | Posted on Thursday, March 17, 2005 - 06:47 pm: |
|
Oldog,
Looks like it was worth the extra effort to make it fit. Looks great. If it wasn't for your posts, I'm not sure I would have stuck with it and made mine work.
SteveH |
Oldog
| | Posted on Friday, April 08, 2005 - 07:48 pm: |
|
I looked at the latest CF on e-bay
take a look at the x1 fly screen
the bottom curve is quite un even
they'er back!
 |
Medsgt
| | Posted on Monday, April 11, 2005 - 10:18 pm: |
|
I'm selling the carbon fiber from my X-1 if anyones interested: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4542891195 |
