G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Prestone Posted on Monday, October 12, 2020 - 07:32 pm:        Hi all, I currently have an aftermarket handlebar mounted headlight cowl that came with the bike (‘98 S1) and I want to put the original flyscreen back on. I have the flyscreen and the mounting brackets are still attached to the bike. I’m missing the hardware (nuts, bolts, washers). I’m planning on scrounging up some some pieces from the hardware store unless someone can point me to an original hardware set or something similar that would likely look better than what I would choose from the bins.   Upthemaiden Posted on Tuesday, October 13, 2020 - 08:31 am:        I'm not sure about the original hardware, but just wanted to mention that the bolts are held in on the back side with rubber well nuts, not normal nuts.   Prestone Posted on Tuesday, October 13, 2020 - 09:33 am:        Thanks for the tip, I was thinking rubber washers   Kc_zombie Posted on Tuesday, October 13, 2020 - 10:34 am:        I used the well nuts from McMaster https://www.mcmaster.com/well-nuts   34nineteen Posted on Tuesday, October 13, 2020 - 11:20 am:        I get mine from Ace Hardware.   Upthemaiden Posted on Tuesday, October 13, 2020 - 11:38 am:        I replaced mine last year. Don't remember buying them, but I know I wouldn't have thought it was important enough to have gone any further than lowes to get them.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: