Author |
Message |
Tw4
| Posted on Thursday, May 16, 2019 - 09:37 pm: |
|
Any one know the thread size so i can plug the hole? or does everyone just leave um open? |
Williamscottrobertson
| Posted on Friday, May 17, 2019 - 12:43 am: |
|
I just use push plugs available at any hardware or auto parts store.
|
Falloutnl
| Posted on Friday, May 17, 2019 - 04:08 am: |
|
Oh yeah, good idea. Need those too for my S1. Thanks for the tip, WSR. |
Tw4
| Posted on Friday, May 17, 2019 - 06:45 am: |
|
thank you |
Upthemaiden
| Posted on Friday, May 17, 2019 - 07:45 am: |
|
The threads are 10mm, in case you choose to go that route. I don't remember the thread pitch, although I'd be willing to put $20 down that it's 1.25. I just remember having to reduce mine from 10mm to 8mm to use the mirrors I have. Side note for anyone that ever tries to use 8mm mirrors... 8mm helicoils screw into the 10mm threads perfectly. |
Gusm2
| Posted on Friday, May 17, 2019 - 11:33 am: |
|
M10x1.25 |
Tw4
| Posted on Friday, May 17, 2019 - 06:28 pm: |
|
just bought a few black Allen m10x1.25x16mm fine $5 |
|