| Author | Message | ||
     Bluelightning |
Just put a rebuild kit in my nissin rear master, cleaned everything and got all the varnish looking gunk out. Even pulled the plastic reservoir elbow off and cleaned under that. This is where the question comes in. Under the plastic elbow, there is a noticeable hole for fluid to flow from the reservoir into the master, and there is what appears to be a partially drilled hole. Cleaned the open hole that was completely clogged, and looks like the partial hole should have a pin bleed but cant get fluid to go through. Trying to get this rear brake working again, and I can't get fluid to reverse fill now. with the bleeder cracked and a full syringe over the bleeder screw, if I pumps the pedal I can feel slight pressure on the caliper now. Just cant get it to back fill the reservoir. |
