| Author | Message | ||
     Upthemaiden |
Let me know what kind of prices you guys would want for a set shipped. As long as they'd be done before the nice spring weather gets here I'd consider buying a set as opposed to cutting some. | ||
| Williamscottrobertson |
Awesome! Thanks Ken! | ||
| S1owner |
I have 12 pair being cut out on the water jet. May take a week or so till they can fit it in and I will need to do a little finish work but next week or 2 should be good to ship. Depending on what I need to do like if I have to destroy several bits drilling holes or not lol 10-15 per pair that includes the shipping in the 48.Funny they giggled as everything they have been cutting is stainless over an inch thick. | ||
| Steveford |
Put me down for a set for my X1W. I made some but they look pretty unprofessional. | ||
| Upthemaiden |
That sounds fair, after what I'd spend on the steel plate I wouldn't mind spending the extra to save the time. I'll just need to try and put my exhaust on the header and measure the distance to make sure they fit better than the bracket I posted above, but otherwise mark me down for a set too. | ||
| S1owner |
If someone wants I can make ine of the holes a slot if it would help. No big deal. Just let me know. | ||
| Williamscottrobertson |
Sounds good to me. I’m down. | ||
| Williamscottrobertson |
Well, since BWB is back up, any progress? | ||
| S1owner |
Nothing yet Plans are in the guys hands just waiting to fit it in! | ||
| Williamscottrobertson |
Ok thanks! | ||
| S1owner |
Progress I need to do a little clean up and drill out the holes to size  | ||
| Upthemaiden |
Looking good! Did you end up making them based on the measurements that Oddalloy posted back in October? I still need to get around to measuring mine to make sure those measurements or what my bike needs. | ||
| S1owner |
Yes I went off the drawing provided. | ||
| Williamscottrobertson |
 | ||
| S1owner |
Ik anyone who wants a pair I will have them ready to ship out on Monday. I have 11 pair to sell. $15/pair that includes shipping in the 48. Paypal preffered but can arrange around your situation Email me at k.paige@charter.net | ||
| Upthemaiden |
Measured mine last night, and it looks like I'll still have to cut my own. If the stock pieces were 2-1/8" then it looks like mine is some kind of alignment issue, and not just a case of having the wrong bracket like I originally assumed because the stock bracket I have is 2-1/8" on the short side, and 2-3/8" on the long side, and the holes were still about half an inch from lining up when I tried before. | ||
| S1owner |
4 pairs paid 7 pairs left. | ||
| S1owner |
Ok I have william for 1 set, Rick and Vincent for two sets. | ||
| Kc_zombie |
Thanks Ken! | ||
| Steveford |
Pennies sent. | ||
| S1owner |
And one set for Steve | ||
| S1owner |
5 sets left | ||
| Williamscottrobertson |
Thanks! | ||
| Roderick |
Is this to replace the rear hanger Z bracket? S1? If yes, I will take 2 pairs. Roderick | ||
| S1owner |
I believe these were used prior to the z bracket. I believe they will work but you will need to verify. Maiden If you need a custom legnth I can make a pair for you same price. Just tell me the distance you need center to center of the holes. | ||
| Upthemaiden |
"Is this to replace the rear hanger Z bracket? S1? If yes, I will take 2 pairs." Roderick, look at my post above. My Z-bracket has two different lengths, so they're not all direct swaps. Worth measuring yours first to see exactly what you need. Ken, I appreciate it! When I was in the garage over the weekend I noticed there was a piece of steel laying with my exhaust that I apparently already bought. Considering I have that, and I'm pretty sure riding weather is gonna break any week now, I'll probably just chop up some ugly ones to get me back on the road, but when I do I'll be sure to write down my measurements, and would be interested getting some from you, since yours look much nicer than anything me and my grinder will come up with. | ||
| S1owner |
Just let me know | ||
| S1owner |
3 pairs left | ||
| Bluzm2 |
Ken, wish I had a need for a set! | ||
| S1owner |
Buy another bike Brad!! |
