G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ronster Posted on Tuesday, January 02, 2018 - 06:36 pm:        2000 thunderbolt S3 want to try drag racing. Need to tap in the kill switch wire for a break away switch. 4 wires are visible just before going into the switch. Looked for a wiring diagram Need the color of that wire. Open to any other suggestion.   12mpghwy Posted on Wednesday, January 03, 2018 - 12:13 am:        Didn't do this on a buell but what I have always done in the past is make a short extension harness for the side stand switch, then you don't need to cut or tap any wires.   Gusm2 Posted on Wednesday, January 03, 2018 - 01:12 pm:        That's a great idea, I'd been thinking of putting one on mine. I will now thanks   Ronster Posted on Wednesday, January 03, 2018 - 06:24 pm:        Yeah thanks for the tip I will try that and I'll let you know how I make out. Bradenton FL drag racing January 6th.   Hybridmomentspass Posted on Wednesday, January 03, 2018 - 07:44 pm:        I'll try to get back to you soon, its been a while since I put a pingel on my S3 (1999) More info on your bike? Mine was mostly chassis mods, but a little in the engine too

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: