| Author | Message | ||
     Shag9499 |
will any sportster 28 tooth front pulley kit fit my m2? the locking bracket broke on mine which let to the nut backing off and chewing up threads. | ||
| Xldevil |
The front pulley 1994-2003 Sportster fits. After 2003,the rubber mounted XL,I don't know. | ||
| S1owner |
28? Should be a 27 or 29 right?? | ||
| 651lance |
The 27 tooth sprocket is stock on all S1, S3, X1, and M2 models. The S2 come with the 29 tooth. | ||
| Jayvee |
So, any Sportster front pulley that fits 1994 to 2003, it should fit Buell M2. The 28 tooth are widely available for Sportsters of that era, to reduce vibration on the highway. The stock US M2 is 27 T. XB front pulleys probably fit too, but not confirmed yet with direct experience... (Message edited by jayvee on July 19, 2017) | ||
| S1owner |
Heres Another pulley question I had a 29 sitting here thiught it was from a sportster never thought to compare it until now and I am putting it on. It has the raised flange on the inside not the outside and sppears to be 1 1/4 wide any idea what it came off as it obviously was not sold to me correctly? | ||
| Hugie03flhr |
That sounds like a big twin pulley. They were stock 30 tooth on the Evo engines with the same splines as the 90s sportsters but the belts were thicker in the early 90s on the big twins 1-1/8 | ||
| S1owner |
Actually figured it out and forgot to post Its from an 04 and up sportster | ||
| Shag9499 |
I ordered a 28 tooth 03 pulley kit. For whatever reason the locking plate broke at the bolt thru hole. Thought I dropped another tranny gear. The locking plate and locknut were toast but the shaft is good thank goodness. Hope to have her back up this week. With parts becoming more and more scarce as well as good useable info I'd like to get a parts manual for my m2. Anyone have any leads on where to go? | ||
| Livers |
I've got a 2000-2001 M2 parts catalog I'd part with. PM me with an offer. | ||
| S1owner |
How much was the stock kit? I ordered the aluminum 28 from bdl | ||
| Mtjm2 |
Someone on fb is making new ones for about 125. Anyone here | ||
| Shag9499 |
RevZilla 118 bucks free shipping....get the pulley lock plate and nut....also a worthless Sportster seal | ||
| S1owner |
Sounds like the same kit. I was able to order this one and use $50 if credit card points  |
