G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Lopy_lightning Posted on Monday, July 10, 2017 - 09:14 pm:        I picked up some carbon under tank panels from MDI Carbon, how the heck do you put these things on?   Lasbuell Posted on Tuesday, July 11, 2017 - 08:25 am:        I was looking at those and I believe it said to use double faced tape or you have to drill holes?   Lopy_lightning Posted on Tuesday, July 11, 2017 - 09:13 am:        They didn't come with any instructions so I'm not sure. Double sided tape would probably work though.   Pontlee77 Posted on Tuesday, July 11, 2017 - 01:00 pm:        If you use Sicaflex the one for boats, it will hold it really firm, I made a piece of flexible plastic sticker it with Sicaflex, and it is hold really strong.   Lopy_lightning Posted on Friday, July 14, 2017 - 09:38 am:        Sikaflex looks great, they make a ton of different stuff! I'll have to look at how it differs from the automotive stuff they make for heat resistance.   Lasbuell Posted on Friday, July 14, 2017 - 09:55 am:        Where did you get this at, I was thinking about getting some? How much?   Lopy_lightning Posted on Friday, July 14, 2017 - 10:01 am:        The panels are from MDI Carbon, about a hundred bucks.   Lopy_lightning Posted on Friday, July 14, 2017 - 10:40 am:        3M ultra high temp adhesive tape is available locally and good up to 550 degrees. I'll try that out while my sikaflex is shipping.   Purpony Posted on Saturday, July 15, 2017 - 01:21 am:        I usually use a small drill bit in a dremel to drill the holes. Then enlarge them with a Chamfer tool. I also sell a frame plug with the needed bolts which makes it and easy install. http://m.ebay.com/itm/Buell-X1-Lightning-frame-plu g-KIT-for-mounting-tank-fillers-BLACK-hardware-/14 2427043297?nav=SELLING_ACTIVE   Lopy_lightning Posted on Tuesday, July 25, 2017 - 11:27 am:        That's a handy kit, mine only has that big hole on 1 side of the frame though.   Hootowl Posted on Tuesday, July 25, 2017 - 02:12 pm:        "That's a handy kit, mine only has that big hole on 1 side of the frame though." The kit only has the plug for one side of the frame too   Lopy_lightning Posted on Tuesday, July 25, 2017 - 02:27 pm:        Yep, I just looked and it's just a normal screw hole on the other side. Kit coolness re-established   S1owner Posted on Tuesday, July 25, 2017 - 06:24 pm:        Thats Purpony Mc moto worx He is on this site   Hootowl Posted on Tuesday, July 25, 2017 - 07:32 pm:        "Kit coolness re-established" I'll let you know...I just ordered one   S1owner Posted on Wednesday, July 26, 2017 - 12:17 am:        Marc has his own website you can get parts from http://www.mcmoto-worx.com   Lopy_lightning Posted on Wednesday, July 26, 2017 - 11:16 am:        Take lots of pics of your install, I'd like to see how you do the drilling.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: