G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Purpony Posted on Sunday, February 12, 2017 - 04:56 pm:        was 60 degrees on wednesday and then 20" of the white stuff on thursday!! Not riding season yet it CT but figured id take some fun pictures in the snow!   Ltbuell Posted on Sunday, February 12, 2017 - 06:15 pm:        ..nice as always,Marc.....nice as always.LT   S1owner Posted on Sunday, February 12, 2017 - 06:59 pm:        Matc What are the pieces coming off your fork at the brake side going forward and one under the fork?   Lake_bueller Posted on Sunday, February 12, 2017 - 07:53 pm:        That is one of the best customized Buell motorcycles that I've ever seen!   Purpony Posted on Sunday, February 12, 2017 - 08:08 pm:        thanks all. Ken- Thats an EBR ZTL2 cooling brake duct. Still debating about keeping it. All still debating on the Ulysses rear front fender. They are both growing on me, but may be taken off.   Williamscottrobertson Posted on Sunday, February 12, 2017 - 08:43 pm:        Man that bike gives me a chubby   K12pilot Posted on Monday, February 13, 2017 - 04:34 am:        BUELLTIFULL!!   S1owner Posted on Monday, February 13, 2017 - 06:52 am:        If you keep the ducts use a full fender maybe? The two together currently IMO dont fit right. But as always your bike is smazing   Court Posted on Monday, February 13, 2017 - 07:54 am:        The bike is amazing and I love the duct. The air duct is perhaps, as the ZTL rotor and FIF was to Buell, one of the signature engineering accomplishments of EBR. I just ordered one for the mantle. . . . I love the wire wheels.   Reepicheep Posted on Monday, February 13, 2017 - 08:11 am:        Fantastic build!   Purpony Posted on Monday, February 13, 2017 - 11:39 am:        thanks all- Ken, you are right about the fender and duct... they kind of dont go together. I did have no fender on the bike for a while and liked that. Then i ordered a MDI carbon XB front fender but it was horrible so i sent it back. I also have a set of STT fork guards i my try... if not ill probably just run a black front fender. I want to be able to swap out different tank colors without having to worry about a front fender all the time. So far i have 6 tank covers   S1owner Posted on Monday, February 13, 2017 - 12:02 pm:        I went with an un painted XB fender and shined it up that way its black but no worry about Scratches and nicks. I had also went with out till I was stuck in the rain. (Message edited by S1owner on February 13, 2017)   Kc_zombie Posted on Monday, February 13, 2017 - 02:08 pm:        Damn, that's ridiculously great looking.   Upthemaiden Posted on Monday, February 13, 2017 - 02:11 pm:        I actually like the look of the duct and the fender you have on there. I think when you look at it from the side the top duct lines up really well with the one part of the fender. I've seen plenty of bikes with no front fender, and as good as some of them look, I used to have a supermoto that just had that front duckbill fender, and remember how old it got getting sprayed in the face every time I rode through a puddle. Combine that with the water that gets thrown at the back of your neck on the XBS and the S1, and I'd just be soaked all over.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: