G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   S1owner Posted on Tuesday, January 17, 2017 - 07:32 pm:        So I may be doing some modes and wondering if anyone out there nows the sizing if these or if anyone has old shifter parts that I could canibalize?   Cupcake_mike Posted on Wednesday, January 18, 2017 - 08:16 am:        i snapped the one on my uly at the eye, the threads were seized and I kept on turning...pieced a new rod together with a couple 5/16 clevis' i had hanging around the shop to get me by until I could order a new part....that was a year ago, the look grew on me and its definitely not something I have to worry about breaking   S1owner Posted on Wednesday, January 18, 2017 - 09:00 am:        Need hiem joints   Brother_in_buells Posted on Wednesday, January 18, 2017 - 09:42 am:        You mean the ones that are used on the xb bikes? Here are some ,but have metric thread http://www.banggood.com/M5-M12-Left-Thread-Male-Joint-Rod-End-Joint-Bearing-Bronze-Liner-Performance-Rod-End-p-1111760.html?rmmds=category http://www.banggood.com/M5-M12-Male-Joint-Right-Thread-Rod-End-Joint-Bearing-Bronze-Liner-Performance-Rod-End-p-1111396.html?rmmds=category (Message edited by Brother in buells on January 18, 2017)   S1owner Posted on Wednesday, January 18, 2017 - 10:41 am:        Metric is fine Do you know if they are comparable in size thats my biggest struggle. Without a part to feel I am not sure   Brother_in_buells Posted on Wednesday, January 18, 2017 - 01:23 pm:        I have not ordered them jet ,but was planning to. Going to measure the heim joints from my xb and compare them with the size table below on the page. How many do you need?   S1owner Posted on Wednesday, January 18, 2017 - 02:03 pm:        2 pair so 2 left hand and two right hand Male threaded ends   Brother_in_buells Posted on Saturday, January 21, 2017 - 12:26 pm:        Well i finally thought about this! The hiem joints on a xb are closest to M5 size metric. (shipping is free ,so it's worth a try)   S1owner Posted on Saturday, January 21, 2017 - 07:29 pm:        I found out XB uses 10-32 heim joints. Pretty cheap unless you get stainless

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: