Author |
Message |
Brother_in_buells
| Posted on Tuesday, April 05, 2016 - 05:08 pm: |
|
Welding aluminum with a mig isn't that difficult ,but those welds are not always that pretty! For tig ,you have to have a steady hand and being a tech for the fine tuning of the machine (depends on brand of welder) And with tig welding make sure you have a good quality welding helmet/mask! |
S1owner
| Posted on Friday, April 15, 2016 - 05:13 pm: |
|
Goodies from revival!
|
Gianni312
| Posted on Saturday, April 16, 2016 - 09:05 am: |
|
Ken, I like the new dash (incorporating the headlight mount, cleans up the loosk of the forks), good choice going with motogadget. |
S1owner
| Posted on Saturday, April 16, 2016 - 10:03 am: |
|
Thanks It was a little of a beast bending it but it wirked out. Any updates on your build? |
Gianni312
| Posted on Saturday, April 16, 2016 - 10:20 am: |
|
Finishing mock up of the dual front rotors, seat, motogadget goodies. Looking at a completion date of early June. Keep going back and forth on whether or not I'm going to paint the aluminum or leave raw.....I'm loosing sleep over it. |
S1owner
| Posted on Saturday, April 16, 2016 - 10:36 am: |
|
Polish it or paint it that's my vote |
Purpony
| Posted on Saturday, April 16, 2016 - 12:44 pm: |
|
you should do both... polish it and then paint either the top or bottom, or have some nice airbrushing done, then clear the entire thing. |
S1owner
| Posted on Saturday, April 16, 2016 - 01:23 pm: |
|
I say yes but polish it put a pattern in it and put a clear candy powder coat on it! Used to do it to the kids race bike looked awesome!
|
S1owner
| Posted on Saturday, April 30, 2016 - 07:09 pm: |
|
At last i get to work on the wiring tomorrow |
S1owner
| Posted on Sunday, May 08, 2016 - 06:52 pm: |
|
Kids bike is almost done should be working on this one within the week! |
S1owner
| Posted on Tuesday, May 31, 2016 - 11:44 pm: |
|
Finally got the kids bike done off to get the carbs synced sure glad mine has 1 not 4 now to get this puppy wired!!! |
S1owner
| Posted on Sunday, June 05, 2016 - 12:37 am: |
|
Installed my new mirrors today knock off of the joker machine ones had to do some lathe work to make them fit but very nice. Also started the wiring!
|
Charger22
| Posted on Friday, June 10, 2016 - 11:03 pm: |
|
Can't wait to see this complete. |
S1owner
| Posted on Thursday, June 23, 2016 - 04:17 pm: |
|
Wiring wiring wiring and more wiring!!! Got a good start need to hook up tail lights. Figure the ingnitiin system wiring to the M unit out, install the m lock oh and order new micro switches evidently my sloder iron heats up to much and fried the internals of the little switches!!!!!
|
S1owner
| Posted on Saturday, June 25, 2016 - 06:23 pm: |
|
Mounted the m switch!
|
S1owner
| Posted on Sunday, July 10, 2016 - 12:45 pm: |
|
I have achieved wiring success! Now I can finish up a couple connections, wait for a couple custom parts and off I go tuning the suspension! I will wrap the main harness today and will be in Denver for the next 2 for work hoping to finish within a couple weeks promising myself to be riding before August!!!!!!! |
S1owner
| Posted on Monday, July 18, 2016 - 08:34 am: |
|
Wiring is pretty much done just waiting on my switch housing. Everything works just cant get it to fire!!!!! Made a lexan windscreen also will be blue to match
|
S1owner
| Posted on Saturday, July 23, 2016 - 09:15 pm: |
|
Alright alright alright she runs everything works!!!! Once I get the switch housing from Purpony I can wire up the switches and start running and adjusting!!!! Once it is fully together and set up I will take some good pics and post them up. Been a long road!!!!! ( I will still probably still do some more wiring work ths winter but that can wait |
S1owner
| Posted on Saturday, July 23, 2016 - 10:22 pm: |
|
Here are a couple pics of it while it is running through NHRS warm up procedure. Wife wanted to see it with the seat its just sitting there.
|
Gianni312
| Posted on Sunday, July 24, 2016 - 08:59 pm: |
|
Ken, which nrhs set up did you go with? I need to buy new jugs and pistons looking at the 1250 big fin. Wanted to know your thoughts. |
Hootowl
| Posted on Sunday, July 24, 2016 - 09:16 pm: |
|
Looking good! |
S1owner
| Posted on Sunday, July 24, 2016 - 09:46 pm: |
|
Went with the standard 1250 kit jugs and pistons. Went together great. Hows your build have not seen it in awhile? |
Gianni312
| Posted on Sunday, July 24, 2016 - 09:55 pm: |
|
Ok, I have to order them tomorrow. Build is coming together ....the motor is holding me up. I decided it needed a little more power so again. Maybe I will get to ride it before it snows this year.....maybe. |
S1owner
| Posted on Sunday, July 24, 2016 - 11:00 pm: |
|
I here you my target date moved a dozen times. Nhrs will take good care of you they will tell you right where to jet your carb and such Post some pics! |
Firemanjim
| Posted on Monday, July 25, 2016 - 01:50 am: |
|
That aircleaner is going to be a real limiting factor--- |
S1owner
| Posted on Monday, July 25, 2016 - 07:01 am: |
|
Well the air cleaner has the same surface area as the okd air cleaner its just taller and less diameter so techniccly it should flow the same amount of air. This is a reg element but If the setup works I will buy a better one. If the whole aircleaner does not cut it I will make a diffrent one. |
Dannybuell
| Posted on Monday, July 25, 2016 - 09:28 am: |
|
wow!! |
S1owner
| Posted on Monday, July 25, 2016 - 09:01 pm: |
|
Here's the vid Thanks to Deans custom exhaust for the wicked sounds the vid does not do it justice https://youtu.be/CmkQZQt1di8 |
S1owner
| Posted on Monday, August 08, 2016 - 01:31 pm: |
|
Ok So I am down to the switches Had Purpony make me a housing ended up not working for me and I screwed up the switches so I resized it and he made me another Now I drilled it out threaded the new switches only to have half the seitches not function needless to say I have a temper so the switches are in a few seperate pieces through out my garage!!! Housing is sitting there but now so frustrated that I just ordered a couple Moto gadget M Switches so I can call it done. I will be riding this thing this year!!!!!!! One note I am going to put in a motogadget gauge and cluster in this winter |
S1owner
| Posted on Saturday, August 13, 2016 - 07:23 pm: |
|
Alright so this is where she sits. Moto gadget switches arrived what a well made item!!!! Installed everytning back together seat mounted. Need to do a once over and make sure I did not miss anything then just temp the shock res in place and a test riding we go!!!!! Winter I will be makeing a better dash and light mount and have the shock res hose shortened.
|