Author |
Message |
Ebutch
| Posted on Tuesday, May 31, 2016 - 11:09 am: |
|
in progress so far.Had these made to be welded on this week. |
Ebutch
| Posted on Tuesday, May 31, 2016 - 11:18 am: |
|
Just using This and it is barely readable little information. |
Ebutch
| Posted on Tuesday, May 31, 2016 - 11:26 am: |
|
Some older information Fun With Flanges www.badweatherbikers.com/buell/messages/47623/7820 24.html?1460149405 |
Dannybuell
| Posted on Wednesday, June 01, 2016 - 09:07 am: |
|
that is pretty cool, do you fit in place and tack it down with a spot weld? |
Ebutch
| Posted on Wednesday, June 01, 2016 - 11:00 am: |
|
Weld Sealing on outside and ground on outside for no LEAKS.I think but shop knows can't leak. I'll find out for Sure! |
Ebutch
| Posted on Wednesday, June 01, 2016 - 11:08 am: |
|
First pic weld at bevel to pipe second step is for header retainer rings to cylinder heads.. will not LEAK !!!!!! + a Supper Flange !!!!!!!!!!!!!!!!!!!!!!! |
Brother_in_buells
| Posted on Wednesday, June 01, 2016 - 11:25 am: |
|
That are some nice looking pieces! For having this made ,what kind of time and $$ are we talking? |
Ebutch
| Posted on Wednesday, June 01, 2016 - 11:52 am: |
|
$180.00 U.S. About 30 days. (Message edited by ebutch on June 01, 2016) |
Brother_in_buells
| Posted on Wednesday, June 01, 2016 - 05:08 pm: |
|
Well that's a bit pricey ,but we all know that one-off parts cost more. Like to see the end result! btw, with this mod you done't need the gaskets anymore!? |
Ebutch
| Posted on Wednesday, June 01, 2016 - 07:14 pm: |
|
No But race header flange is Weak and tend to leak this stops it. |
Ebutch
| Posted on Friday, June 03, 2016 - 06:07 pm: |
|
Done will install tomorrow also billed an extra $60.00 total $240.00. (Message edited by ebutch on June 03, 2016) |
Ebutch
| Posted on Friday, June 03, 2016 - 06:09 pm: |
|
|
Ebutch
| Posted on Friday, June 03, 2016 - 06:11 pm: |
|
|
Ebutch
| Posted on Saturday, June 04, 2016 - 09:48 pm: |
|
Installed and NO LEAKS !!!!!!!!!!!! |
Ebutch
| Posted on Saturday, June 04, 2016 - 09:52 pm: |
|
|
Xldevil
| Posted on Sunday, June 05, 2016 - 09:20 pm: |
|
Beautiful bike and a very good job on the headers. Well done. |
Brother_in_buells
| Posted on Monday, June 06, 2016 - 01:13 pm: |
|
Great work! |
Littlebuggles
| Posted on Tuesday, June 07, 2016 - 06:29 am: |
|
Looks damn sexy! Nice fix!!! |
S1owner
| Posted on Tuesday, June 07, 2016 - 06:57 am: |
|
I am curious. If the header now requires no exhaust gasket ( if I understood correctly) wouldnt the harder stainless metal where on the aluminum heads while vibrating? |
Ebutch
| Posted on Tuesday, June 07, 2016 - 07:31 am: |
|
I use these for perfect fit.
but H-D And that's the Angle of the front of the Flange . (Message edited by ebutch on June 07, 2016) |
S1owner
| Posted on Tuesday, June 07, 2016 - 11:13 am: |
|
Ok that makes sense |
Ebutch
| Posted on Tuesday, June 07, 2016 - 09:49 pm: |
|
What it sounds like: http://vid144.photobucket.com/albums/r200/ebutch/0 607161912.mp4 |