| Author | Message | ||
     S1owner |
Ok so on my custom build I have an XB shock. What I need is steps to have done to shorten the hose to the remote res. How do I have it done? Do I need a shock guy can I have a hose shortened and do this myself? (Message edited by S1owner on February 08, 2016) | ||
| Jayvee |
Supposedly my Penske is pressurized nitrogen inside. Might better find out about that. | ||
| Brother_in_buells |
On the big,bad&dirty uly section some owners refilled there shocks with new oil by just loosen up the hose or reservoir. | ||
| S1owner |
I will check it out | ||
| Loose1 |
Just take it to "The shock shop". He's between becker and big lake. He really knows his stuff and is reasonable. Matt http://myshockshop.com/index.html | ||
| S1owner |
Thanks Matt | ||
| 651lance |
I sent him an email and he told that he will not do shocks for street bikes.  | ||
| S1owner |
Thanks for checking Lance. I have a guy in Ramsey area I have talked too named Clay at PDR performance that will do any shock and had said he could do anything I wanted even custom build me one so he should be able to help me out | ||
| S1owner |
Up date PDR said they can do it no problem and anything having to do with shocks |
