Author |
Message |
Lander_x1
| Posted on Thursday, August 06, 2015 - 02:24 pm: |
|
The below Cam kit will work well with my 99 FI X1 http://www.harley-davidson.com/en_us/media/downloa ds/service/isheets/-j01655.pdf |
Phelan
| Posted on Thursday, August 06, 2015 - 02:30 pm: |
|
Unless you have headwork and more compression than stock, different cams are a waste in an X1 IMO. Stock valve springs are only good to about .510 lift, and the stock .497 cams have that and a fair bit of duration. |
Lander_x1
| Posted on Thursday, August 06, 2015 - 02:40 pm: |
|
Phelan the question it's that i don't know if those cams are the stock ones or not i have the possibility to buy it for around 150 Eur |
Phelan
| Posted on Thursday, August 06, 2015 - 03:11 pm: |
|
Do the cams you have now have markings on them? If so what are they? |
Sportyeric
| Posted on Thursday, August 06, 2015 - 04:14 pm: |
|
Looking at the pdf, they are "B" grind, which, if I understand correctly, is what the X1 would have come with from the factory. So they are the same as what you currently have in the bike. Although maybe European models were different? |
|