| Author |
Message |
    
D_adams
| | Posted on Thursday, December 04, 2014 - 01:06 pm: | 
|
If I were a betting man, I'd say that it's about an 85 degree angle, not 90, so if you're going to cut/weld it, that's what I'd try to get out of it. |
Buellish
| | Posted on Thursday, December 04, 2014 - 01:50 pm: |
|
I don't don't have the skills to weld it and would prefer not to.The elbow appears to be chrome plated mild steel and I don't want to get into having it replated.I bought it to bolt right on the way my other V&H did. |
D_adams
| | Posted on Thursday, December 04, 2014 - 04:27 pm: |
|
Looks more like polished 304 stainless to me, but I've been known to be wrong before. |
Buellish
| | Posted on Thursday, December 04, 2014 - 05:04 pm: |
|
It's pretty magnetic for Stainless. |
Buellish
| | Posted on Saturday, December 06, 2014 - 08:27 pm: |
|
Does anybody know what the "non 90" elbow fits? |
Blks1l
| | Posted on Sunday, December 07, 2014 - 10:21 am: |
|
I think that is for the S1W and 98 S3. |
Buelljunkie
| | Posted on Wednesday, December 10, 2014 - 07:21 pm: |
|
I found that pic I was looking for...you can see the difference in the inlet pipe angle, among other things.
I think when I took the pic I was trying to align the front mounting tabs.
|
Buelljunkie
| | Posted on Wednesday, December 10, 2014 - 07:31 pm: |
|
And I think Blks1 is right that the "non-90" is for an S1W...in the pic above, the muffler on the left came off of my 98 S1W.
The muffler on the right came off of my 02 M2. I remember it being pretty much in line front to back, but to my eye the outlet end was noticeably lower. Could have been installed incorrectly by the PO I suppose. I found a brand new Wileyco, took my time mounting and have had zero problems. |
Jefc73
| | Posted on Thursday, December 11, 2014 - 03:22 pm: |
|
Ok this muffler will be back up for sale. Cleaned it up and put new nameplate on it. I will mount on my S1W this weekend to make sure it fits. It definitely fits something or vance and hines wouldn't have made it. I believe Buellish was trying to install on an S2. Not sure though.
|
Buellish
| | Posted on Thursday, December 11, 2014 - 05:18 pm: |
|
I was installing it on an '02 S3T.The S2's don't have the 90 degree elbow like the S2's have. |
Kmbuell
| | Posted on Friday, December 12, 2014 - 05:41 pm: |
|
Jeff,
Sent you a PM on this muffler.
Kevin |
Jefc73
| | Posted on Friday, December 12, 2014 - 06:11 pm: |
|
Sent you a pm back Kevin. |
Kmbuell
| | Posted on Friday, December 12, 2014 - 09:26 pm: |
|
PM returned!
Kevin |
