G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Sportyeric Posted on Monday, August 04, 2014 - 06:56 pm:        I'm going to need a new rear caliper for my new S2. The one on it is kinda beat-up. Was the same caliper used for the S1s and M2s, and so on? Is it different but a newer model's will fit? Are rebuild kits still available?   1313 Posted on Monday, August 04, 2014 - 07:42 pm:        Early tubers - up to the change to Nissin calipers for '98 - all used the same Brembo rear caliper. So, yes, early S1's, M2's and S3's would also have the same rear caliper. A later Nissin caliper should fit with the Nissin mounting bracket, if you wanted to run a later setup, but I would recommend the later Nissin master cylinder and reservoir for proper fluid capacity. The OE Brembo had to have been used on other bikes of the era as well... 1313   Ratbuell Posted on Tuesday, August 05, 2014 - 09:47 am:        ...or just get a rebuild kit...   Sportyeric Posted on Tuesday, August 05, 2014 - 04:16 pm:        Nah. Its scarred up. Need a prettier one.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: