G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mhlunsford Posted on Saturday, June 07, 2014 - 11:34 pm:        I have a m2 25k miles and have had the primary off a few times to fix trans. Now no matter how I adjust the primary I get a rattling . I listen with a scope and sounds like from the clutch. Which bearing is common to go out or any recommendations ? Replace the clutch pack and adjusting bearing ?   Mhlunsford Posted on Sunday, June 08, 2014 - 12:27 am:        I also have a new chain adjuster, so do not think that is it.   Buellistic Posted on Sunday, June 08, 2014 - 12:59 pm:        Mark, check your e-mail !!!   Reducati Posted on Sunday, June 08, 2014 - 09:13 pm:        i had same issue...turned out to be rotor nut!   Mhlunsford Posted on Sunday, June 15, 2014 - 02:37 pm:        Turned out to be clutch adjust bearing   Harleyelf Posted on Sunday, June 15, 2014 - 08:30 pm:        Thanks for following up and letting us know.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: