| Author | Message | ||
     S1owner |
Brad pm sent I have a bolt on nhrs 1250 kit xb rockers to install | ||
| Bluzm2 |
Slam dunk Ken. | ||
| S1owner |
Been on vacation and out of touch eill be assembling and getting ready for the riding season so I can figure out what works and what needs improvement or modifacation. | ||
| Joesbuell |
Looking good. What belt and front pulley are they? | ||
| S1owner |
140 tooth belt and a 27 front. Will be a little wheelie machine but still streetable. I still have room for a 29 in front if I want and thats almost stock. | ||
| Rocket_in_uk |
What stirrups are you using?  Rocket in England | ||
| Joesbuell |
It will be lol 29/65 would still be good too. | ||
| S1owner |
NHRS 1250 kit installed! XB rockers installed! Thanks a ton Brad!!!!!! | ||
| S1owner |
  | ||
| Bluzm2 |
Hey! That thing looks familiar!  | ||
| S1owner |
It should! Thanks for your help Up for some tire changes? | ||
| Bluzm2 |
Sure thing Ken, it would have to be this weekend though. Or maybe Friday evening? | ||
| S1owner |
Either one works for me I will give you a call | ||
| Joesbuell |
How did you go with the swingarm adapters? | ||
| S1owner |
Had them made a while back work great | ||
| Joesbuell |
 | ||
| S1owner |
Ok so I picked up a 2.5 header and I am looking for a nice can. I love my White Bros but its a 2" so anyone have suggestions? Or have anything they are selling? | ||
| Phelan |
Why not build your own? With all that room under there now you could even fit an oval car can like a Borla or Edelbrock under there. | ||
| S1owner |
Do not want a big one nice tight and small | ||
| Jkgonzo |
Do not want a big one nice tight and small Need I say it.......Aren't we all looking for one of those my friend?? | ||
| S1owner |
With help from Brad the rubber was dismounted and remounted onto the xb wheels and balanced. Worked on her today and she stans on her own all tie points and isolators installed and torqued! Also installed the rox risers. Will post pics when photobucket stops acting up. (Message edited by S1owner on April 19, 2014) | ||
| S1owner |
  | ||
| S1owner |
Working on the kick stand mod. The light mount and my new speedo setup should look pretty clean when done  | ||
| S1owner |
Bought a new tool love it! Wanted a vertical/ horizontal band saw but they take up so much room and not very portable so after using a hand held from work I went that route then made this stand and foot switch its still portable also just lift it off the stand!    | ||
| S1owner |
Ok so the kickstand is pretty much done have a couple things to do on it still but here it is     | ||
| V74 |
would you have any drawings of the kick stand assembly and notes on its making and where you sourced the parts from ? | ||
| S1owner |
Pm me I will send you the info | ||
| Screamer |
Some of the early pre-production S1s had the sidestand mounted to the primary cover like you've done. I tried getting one for my S2, but I was told it was being changed to the frame because it "loaded" the primary cover causing the cover gasket to leak. I only saw photos of it that some dealership co-workers had taken at the S1dealer intro - so I don't know if it had support going under the cover like you've done. Always wondered if it had enough support would that eliminate any stress-induced leaks. | ||
| Phelan |
I was wondering about that possibility myself. | ||
| Davefl |
I wonder if the elimination of the paper gaskets with the newer metal coated caskets might solve the leaking issue. |
