| Author | Message | ||
     Coxster |
I've been thinking about cutting down the tail section on my '99 M2, what I call the 'curtain' look. This is my efforts playing in MS paint ( I don't have photoshop ) I know the battery area is not be accurate, but you get the idea. I plan on keeping the stock seat. Would like to hear other opinions.  | ||
| Kilroy |
I like it - do it. But keep your original tail. They are getting harder and harder to find. I have a slightly "trimmed" one (see my profile pic). I don't need it any more, you could chop it any way you want and still have your stocker in case you ever want to swap back. | ||
| Blackm2 |
I have never seen an alteration on these tails that looked good in my opinion. Don't forget all the electrical that is under there that you will be able to see. | ||
| Jayvee |
While I agree with BlackM2, I would add I never really liked the tailpiece on the M2. But as he said, its used to cover a lot of things that are hard to beautify, the ignition module, wires etc. The Manta tailpieces at AirTech look pretty good, but same problem. | ||
| Kilroy |
This is why I say keep your stock piece. I ran 2 different cut down tails for awhile, but eventually went back to the stock one. | ||
| Jayvee |
 | ||
| Jayvee |
http://upload.wikimedia.org/wikipedia/commons/d/db /Buell_M2_Cyclone_white_2000_side.jpg | ||
| Jayvee |
http://www.badweatherbikers.com/buell/messages/476 23/540363.html?1273605917 | ||
| Secretariat |
That is one pissed off looking Buell. Nice bro. | ||
| Secretariat |
 I just got this tail piece. I havent installed it yet but there is no wiring adjustments other than blinkers. The tail light fits right inside. | ||
| Rich55016 |
I have that tail section from air tech for sale right now if your interested. I decided to go another route. Comes with the tail section, seat, and under tail. | ||
| Dueller |
 in progress |
