G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Lynrd Posted on Friday, November 15, 2013 - 08:56 pm:        I believe in the factory manual - and when it says in there - DON'T TOUCH THE TIE BARS, THEY ARE SET AT THE FACTORY in there - I believe them. But.... I am mating up a later engine with a S2 frame that was rescued, and all of the hardware is gone - so I will need to align the new tie bars. Since it's not in the service manual - any tips to doing this or is it just common sense?   Kc_zombie Posted on Saturday, November 16, 2013 - 10:23 am:        This may help.http://www.badweatherbikers.com/buell/messages/476 23/601430.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: