| Author | Message | ||
     Kalali |
I think this a must have for anyone who plans to keep the bike for a while. Even if you plan to sell it, it is still a great "fix" to not only help the next guy but also avoid giving Buell a bad name... Matrim - Thanks again for your initiative to follow this through. Can't wait to get mine. | ||
| Mcelhaney14 |
Payment sent for 2 of them. Thanks! | ||
| Purpony |
payment sent- thanks! | ||
| X1_rider |
Payment sent, you can tell me how much for shipping to Canada and I'll make another payment for shipping. | ||
| Red93stang |
Payment sent! Thanks! | ||
| Matrim |
Hey all, I was hoping to start shipping all the parts tomorrow, but I ran into a small setback. The screws I ordered a while back are back-ordered at the moment and are estimated to arrive anywhere from a couple days to two weeks. I have a handful of screws from the past batch so I can ship a few parts out tomorrow, but the rest will have to wait. If anyone has a problem with this just shoot me a PM and I'll get your money back until I can actually ship yours out. | ||
| Jolly |
Im fine and don't have a current emergency, in fact probably don't plan to use them for at least two weeks anyway, please move someone with a current problem ahead of me since I can accept a late delivery. | ||
| Mcelhaney14 |
No problem here. Send them when you are ready. | ||
| Red93stang |
No problem here either. Take your time, I understand supplier issues! | ||
| Jamie04 |
Payment sent for 1. Thanks for making these. | ||
| Matrim |
Possumtrot and s1owner; yours are on their way. For everyone else, it looks like the screws "shipped" today and I will probably have them by Monday. | ||
| S1owner |
Thank you for taking the time to do this! | ||
| Arizona_buell |
Is it too late to get in on this ? | ||
| Matrim |
No problem S1owner. Arizona buell - It is not too late, I should have plenty. | ||
| Bluzm2 |
Kevin, Payment on the way in a minute, no rush here. Brad | ||
| Wildbuellrider |
Payment sent, no hurry on the parts--Thanks! T | ||
| Buell_bert |
Kevin I have just sent you $26 thru Paypal for an order of 1 kit. Thanks. | ||
| S1owner |
Received the kit today thanks! Really hard to realize how small till you see it! Lol | ||
| S1owner |
If any of you want I have the instructions in an email so you can print it out just PM me | ||
| Possumtrot |
Kit received, thanks | ||
| Matrim |
I packaged up a bunch of the orders and sent them out this morning. Ill try to get the rest on their way tomorrow. | ||
| Kalali |
Perfect timing for me as mine started to act up this weekend. Ended up removing the screws to pull the assembly and remove the cap from the bottom. | ||
| Buell_bert |
The main problem may be the phenolic lip thingy attached to the cap spreading out or expanding with age or gas. If you get it out, just sand it down and it will work fine for awhile. But if this part was made from aluminum it would not be a problem the way I see it. Hey trash me all you need to but that is my 2 cents worth. It looks like it gets to be to large of a diameter to release from the cap to pull up. | ||
| Matrim |
I mailed the rest of the parts today. If anyone still wants one there are plenty remaining. | ||
| Kc_zombie |
Kevin, received mine today, nicely done. Thanks! | ||
| Mcelhaney14 |
Received mine today. Thanks! | ||
| Forerunner |
Got it, thanks! | ||
| Implicate |
I'd like one too, mine just stripped out. | ||
| Kenny_gilgore |
I would like to purchase one before mine strips out. | ||
| Kalali |
Received mine yesterday and just finished the modification. I decided to use a small reamer vs. using the drill. Its a little easier to control on such soft plastic piece which I believe is a poor design choice. All in all, the kit is much better than Buell's design and very well made.. Thanks again Matrim. BTW, it works much better if the nut is not too tight. |
