| Author | Message | ||
     S1owner |
Ok so I got this off ebay thought it would be a thin plate but it is almost 3/8" thick solid brass and heavy so where to mount? I was thinking the center of my air cleaner   | ||
| Ratbuell |
It's designed to replace your timing cover. Look down from the air cleaner. It's where the headpipes meet and says "Buell S1 Lightning". Factory covers are installed with rivets; most folks change to 10-24 screws for easy service. | ||
| S1owner |
Yep i realize where it is supposed to be but I think with the weight I want to bolt it in place not screw think the vibs will result in lose of bling! | ||
| 01x1buell |
i would just put it where it was meant to be, and tap the steel plate underneath and use bolts to secure it. | ||
| Coxster |
I'd add some loctite 222 or 243 as well | ||
| 01x1buell |
and that as well, good call. |
