Author |
Message |
Mcyclone2
| Posted on Monday, June 11, 2012 - 02:03 am: |
|
So my bike is only running on one cylinder its getting spark to both getting the gas what else could cause this??? any help would be great or Dose any one know someone who can take a look at it in the Milwaukee wi. area willing to travel |
Goody
| Posted on Monday, June 11, 2012 - 09:33 am: |
|
Ignition coil? Are spark plugs new? Check condition of spark plug wires, you may have a short in the wires and its grounded. All you need is a GOOD spark, fuel and air. |
Buellistic
| Posted on Monday, June 11, 2012 - 10:30 am: |
|
COMPRESSION TEST !!! |
Cyclonecharlie
| Posted on Monday, June 11, 2012 - 10:47 am: |
|
Buellistic is right...anything else right now is wasting time. |
Mcyclone2
| Posted on Monday, June 11, 2012 - 01:03 pm: |
|
Okay I put a new coil, wire, plugs before I went on here that was my first thought |
Mcyclone2
| Posted on Monday, June 11, 2012 - 01:06 pm: |
|
I also did a compresion test 120 psi on both cylinders and the both hold |
M2typhoon
| Posted on Monday, June 11, 2012 - 02:54 pm: |
|
Seeing how you only have one carb and assuming that the intake valve is opening properly, I would have to say you have a spark issue. Plugs, wires and coil. Check them all. |
Mcyclone2
| Posted on Monday, June 11, 2012 - 03:40 pm: |
|
I put all new stuff on plugs wires coil |
Jayvee
| Posted on Tuesday, June 12, 2012 - 01:32 am: |
|
Fuel, compression, spark at the right time. There's only three things it can be. One of the tests has to be a false positive. |
Cyclonecharlie
| Posted on Tuesday, June 12, 2012 - 03:53 pm: |
|
I gotta ask...you did replace with the same style coil,correct? (dual fire vs single fire) |
Goody
| Posted on Friday, June 15, 2012 - 08:16 am: |
|
Ignition or timing issue would be my next guess. Sorry dude. |
|