| Author | Message | ||
     Norcalsaint |
I am not finished with the install but I thought I would show you what I have done so far… - The top mount had to be put behind the bracket to give it clearance for the lens. (and still needs a small adjustment) - The photo with them lit up was me hooking them up to a 12v power supply. Only the lower strip would be lit all the time. They are the perfect width to use 4 or 5 of them as a headlight replacement but would have to test the brightness before I did. Believe it or not it was only $7.35 for the set with free shipping!!! Check them out here : http://www.ebay.com/itm/300670047618?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649    } | ||
| Coxster |
Nice look. I tried a LED version of the 1157 bulb and was severely disappointed. Do you have anything white on the Lic Plate?? | ||
| Norcalsaint |
Anything white?? What do you mean? BTW, These are white LEDs so I am still using the red standard tail light lens. | ||
| Coxster |
wondered if you had anything shining downward ( or if you even needed too ) | ||
| Norcalsaint |
Never mind I think I know what you are asking.. Like I said above I am using the stock red lens so it still has the clear window on the bottom. (but it does not light up the plate as well as the bulbs did) |
