Author |
Message |
Leprikan
| Posted on Wednesday, November 23, 2011 - 03:26 am: |
|
Does anyone know where I can get a rebuild kit at a decent price? |
M2marc
| Posted on Wednesday, November 23, 2011 - 08:28 am: |
|
What are you trying to accomplish. Jets are only a couple dollars each. Unless you need every moving part. |
Buellistic
| Posted on Wednesday, November 23, 2011 - 10:53 am: |
|
CV CARB. Class 101. just Pm Me for a copy ... |
Jayvee
| Posted on Wednesday, November 23, 2011 - 01:42 pm: |
|
JP Cycles has three different brands of CV rebuild kit, from $15 to $16. |
Jim2
| Posted on Wednesday, November 23, 2011 - 02:38 pm: |
|
I saw one at BKrider for $10. |
Leprikan
| Posted on Tuesday, November 29, 2011 - 03:13 am: |
|
I am wanting to rebuild the whole thing. |
M2marc
| Posted on Tuesday, November 29, 2011 - 08:45 am: |
|
this is a rebuild kit. but if you need jets, floats, needles, slides etc... you'd be better off just buying a used carb. http://www.jpcycles.com/product/401-016 or http://www.ebay.com/itm/Harley-Davidson-Twin-Cam-C arb-Carburetor-Kit-40mm-CV-/280764798530?pt=Motorc ycles_Parts_Accessories&vxp=mtr&hash=item415ee2d64 2 and just the carb. http://www.ebay.com/itm/2002-Harley-Davidson-40mm- Cv-Carb-w-chrome-top-cap-No-Reserve-/250940901794? pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item 3a6d3e49a2 |
Richsm2
| Posted on Tuesday, November 29, 2011 - 11:59 am: |
|
check the kit for the proper "o" ring that goes to the accel pump a square tube like "o" ring comes from the factory, the round "o" ring seemed to restrict the flow at WOT. had to go to the hd dealer for that. |
Daveswan
| Posted on Wednesday, November 30, 2011 - 06:55 pm: |
|
CV Performance sells the individual seals, gaskets or everything in a kit for $18 including shipping. I get most of my carb stuff through them if I need it. |
Gusm2
| Posted on Sunday, December 25, 2011 - 07:56 pm: |
|
fit a mikuni HSR42 it is one of the best improvments you can make to your motorcycle so much easier to fine tune |
Captainkirk
| Posted on Sunday, December 25, 2011 - 09:17 pm: |
|
+1 on that! |