| Author | Message | ||
     F_skinner |
Anyone have a source for the two head bolts Part numbers 3425Y / 3436Y. My local fastenal does not have them. TIA Frank | ||
| F_skinner |
The new HD part numbers are AA0622.1CBZB and AA02722.1CZ but are no longer available through HD and I would rather have another source anyway. Actually I think one is but not the other but I cannot remember which. Frank | ||
| Bigslug |
Frank, Have you tried McMaster-Carr? http://www.mcmaster.com/# Mike | ||
| F_skinner |
Thanks Mike, no I have not. I will take a look. I hate trying to figure this out without bolt in one hand and a parts bin in the other.  | ||
| 1313 |
AA0622.1CBZB AA0 = American Threaded Bolt (A0 = Metric as an aside) 6 = Diameter in 16ths; 6/16 = 3/8 22 = length in 8ths; 22/8 = 2 & 6/8 = 2 & 3/4 . 1 = hex head bolt C = Coarse threads (F = Fine threads as an aside) B = Gee, I don't remember... Z = clear zinc (or silver in color...) B = Gee, I don't remember... (But a B near the Z usually signifies Black Zinc, which wasn't used on the S2...) therefore: AA02722.1CZ 7/16 hex head bolt, 2 & 3/4" long, with coarse threads in clear zinc Hope this helps some, 1313 | ||
| Court |
>>>Anyone have a source for the two head bolts Part numbers 3425Y / 3436Y Drop a note to BZ. I am going to PM you his contact information. He can get all the parts for you. Tell him I told you to call. | ||
| F_skinner |
Thanks Court. Brankin, do you keep all that info in your head??? I do not know when I will get home. A few days ago I would have said Nov time frame. Long story short: I am one of those guys that has never interviewed for a job and kind of just fall into them. I got a call yesterday for a job that I may take and just got done relaying my salary requirements to the CEO about two hours ago. I will see what they come up with but I would be starting at square one as far as vacation time. So the answer is I do not know. However..... I will let you know. I look forward to seeing everyone again. | ||
| Court |
>>>Brankin, do you keep all that info in your head??? I'm not entirely sure that asking for an inventory of what's in Brankin's head is a wise move . . . . the internet can only handle so much. | ||
| 1313 |
Brankin, do you keep all that info in your head??? Yes, I most certainly do! But, as you can see by the "Gee, I don't remember" entries, there are some things that have slipped through the cracks over the years. Court's right on SO many levels...  Although the main thing on my mind right now is finding a new career. I wish I had your luck Frank as things are quite different than they were just earlier this year. You can always negotiate vacation time... That's what I did for the company I started working for in April - I started with 3 weeks of vacation, which is pretty much the only thing that allowed me to make Homecoming this year. Then when I got back the holding company that owns them forced them to do a reorganization and in August myself and 22 others were given our walking papers. Send some of your luck my way! 1313 | ||
| Road_thing |
What Brankin said--just tell the CEO that no vacation the first year is a non-starter. rt | ||
| Bigslug |
Frank, My S2 parts book lists 3425Y as Bolt,3/8-16x2-3/4 hex head and 3436Y as Bolt, 7/16-14x2-3/4 hex head(Zinc Plated). 1313's memory was spot on, I was surprised I remembered where my parts book was! Mike | ||
| F_skinner |
Thanks Mike.... Got them today. http://www.allensfasteners.com/search_results.asp? txtsearchParamCat=73 | ||
| Bigslug |
Got mine in the mail Friday, definitely the cheapest price I have seen for the F911 bolts. Mike (Message edited by bigslug on September 13, 2011) |
