Author |
Message |
Nwrider
| Posted on Monday, July 11, 2011 - 02:44 pm: |
|
I am looking at buying a used forcewinder off of a carbed bike. I have an 01 x1 that is fuel injected. I don't need the xr2 with the breather tube since I have rerouted my breather with a catch can. Is the mounting the same to the throttle body the same as a carb? Thanks! |
Preybird1
| Posted on Monday, July 11, 2011 - 04:10 pm: |
|
flip the intake elbow over and look where it mounts to the throttle body. If there is a tear drop shaped notch in it then you just need a different gasket to mount it. I am using a carbed force winder elbow right now and its been on for years. The notch is for the air valve\jet on the carb if i remember correctly. |
Nwrider
| Posted on Monday, July 11, 2011 - 04:17 pm: |
|
Perfect... I will pick it up then. Thanks Preybird. |
|