| Author |
Message |
    
Andreax1
| | Posted on Friday, June 03, 2011 - 08:47 pm: | 
|
Remenber to' send me original eeprom please!
Tomortow if it's sunny i can try My new map, end if it work good i can send you it! |
01x1buell
| | Posted on Friday, June 03, 2011 - 09:13 pm: |
|
ok will do .... |
Andreax1
| | Posted on Saturday, June 04, 2011 - 03:45 pm: |
|
Stil raining... Tomortow i'm busy 4 a married, i can try monday! |
Andreax1
| | Posted on Monday, June 06, 2011 - 12:53 pm: |
|
Still raining 
But i have a question: after have tuned the rear how i rear cilinder whit megatuning what i must do whit the front??? |
01x1buell
| | Posted on Monday, June 06, 2011 - 01:19 pm: |
|
Im not quit there myself windows 7 woll not let me save data |
Andreax1
| | Posted on Monday, June 06, 2011 - 03:58 pm: |
|
i can do it 4 you, but i must understand how to set the front map! |
Slayer5690
| | Posted on Monday, June 06, 2011 - 04:05 pm: |
|
Andreax1 when you have your rear map set up copy it to the front and add about 3 to 5 points to the whole front map. if I remember correctly I'm sure some one else on here will verify or correct me |
01x1buell
| | Posted on Monday, June 06, 2011 - 04:06 pm: |
|
If the rear is good then copy it to the front then take a little bit of fuel away from the front. the rear should be a little richer. Im not sure but thats what i have heard. |
Andreax1
| | Posted on Monday, June 06, 2011 - 04:10 pm: |
|
but the proseries map have value most different! i don't want do a bad work! |
01x1buell
| | Posted on Monday, June 06, 2011 - 04:14 pm: |
|
Check the ecmspy tuning guide. I wish i could help |
01x1buell
| | Posted on Wednesday, June 08, 2011 - 06:53 pm: |
|
hey andreax1 how is everything going with the megalog??? i have mine all set up but i do not have the time right now..and it is 98 outside so its to hot right now for me. if you get a good tune send it over to me and i will look and see how it matches up with mine.. |
Andreax1
| | Posted on Thursday, June 09, 2011 - 04:12 am: |
|
Afefter run mega log i try to' loda it in ecm spy but it loss wrong, mutch number Are 0 and the map is wrong... I must copy and past One by One all number
When i have finisch i can try to' carghe it on megaupload! |
Andreax1
| | Posted on Thursday, June 09, 2011 - 04:16 pm: |
|
I have find the problem... Ecm value limit is 255 end in mutch point megalog say i need more fuel, like 300 and ecmspy don't accept it... What i can do? |
Kalali
| | Posted on Thursday, June 09, 2011 - 07:39 pm: |
|
Not sure I understand what you're trying to do. The value 255 is equivalent to 100 in hex (or binary don't remember off hand). Something does not make sense. |
01x1buell
| | Posted on Thursday, June 09, 2011 - 07:51 pm: |
|
hey mohsen ,, i was wondering if you could pm me with your personal map for your bike so i could compare it to mine.. |
Andreax1
| | Posted on Friday, June 10, 2011 - 01:28 pm: |
|
After VE analizer megatuning change the value in My map over 300... I think The injection is too small 4 the elaboration on My bike |
Kalali
| | Posted on Friday, June 10, 2011 - 02:04 pm: |
|
01x1buell, done.
Andrea, I see, you're talking about the injector pulse width values in the table not the axis. I remember reading somewhere that 255 is the highest allowable value. I think it has to do with the size of the injectors. But what size motor do you have in there? I think even folks with 1250cc motors were able to reuse the OEM injectors. |
01x1buell
| | Posted on Friday, June 10, 2011 - 03:33 pm: |
|
Hey kalili doyou think that an autoparts store would have the starter relay i need. |
Andreax1
| | Posted on Friday, June 10, 2011 - 04:06 pm: |
|
I think to' have s oem motors, whit full exaust 2,5", forcewinder, cam 4d, and andrews balacers... Maybe the bad weather have fault My datalog... I can try again when sunny! |
Kalali
| | Posted on Saturday, June 11, 2011 - 07:41 am: |
|
"...autoparts store would have the starter relay i need"
Let us know if you found an "auto" substitute.
I bought a couple as spares the last time I was at the Buell dealer. |
01x1buell
| | Posted on Saturday, June 11, 2011 - 08:39 am: |
|
I went to advanced auto parts and gave them the relay and yes they have them. They are 15 bucks each and it works great.even comes with a rubber cover on it. |
Kalali
| | Posted on Saturday, June 11, 2011 - 12:30 pm: |
|
Thanks. More pricey than the HD unit but its good to know.
New maps working better for you? |
01x1buell
| | Posted on Saturday, June 11, 2011 - 12:39 pm: |
|
I have not had a chance to ride with the new map yet. I burned it to ecm and reset tps and afv lastnight bit due to rain and work i will have to wait till monday to try it out i willl let you kknow how it goes |
Andreax1
| | Posted on Saturday, June 11, 2011 - 02:00 pm: |
|
http://www.megaupload.com/?d=TWNVZ32F
My first work, i have degrase the number >255 at 255 for do it work... i hope to try it tomorrow |
01x1buell
| | Posted on Saturday, June 11, 2011 - 05:34 pm: |
|
andreax1 i tried to look at your megalog but i could not get it.. maybe you could pm me with your actual maps so i can look at them. i am not saying i am an expert in anyway but i am just curious about what is going on with your bike. |
Andreax1
| | Posted on Saturday, June 11, 2011 - 07:11 pm: |
|
It's one map file, isn't megalog file! Ok i can try to' send it to' you! |
01x1buell
| | Posted on Saturday, June 11, 2011 - 07:45 pm: |
|
Yeah please send it to me i just want to know whats going on. |
Andreax1
| | Posted on Sunday, June 12, 2011 - 07:25 am: |
|
I have try it and work soo bad,i have look My engine temp sensor is fault, it show bad temp on ecmspy! I can't continue whit megalog now, i first must buy new sensor |
01x1buell
| | Posted on Monday, June 13, 2011 - 07:10 pm: |
|
so how is everything going andreax1????? |
Andreax1
| | Posted on Tuesday, June 14, 2011 - 04:06 pm: |
|
i have disconnect the sensor 4 use the bike and now work better, but i'm waiting the new sensor for continue my experiment! and you? your bike run better? |
01x1buell
| | Posted on Tuesday, June 14, 2011 - 05:02 pm: |
|
have not been riding it still have broken header stud.. i should have it going by weekend i hope |
01x1buell
| | Posted on Monday, June 27, 2011 - 04:58 pm: |
|
hey andreax1 how is everything going with the bike??? |
