| Author |
Message |
    
Rodent
| | Posted on Wednesday, June 01, 2011 - 01:46 pm: | 
|
Forced induction. |
01x1buell
| | Posted on Saturday, June 04, 2011 - 09:39 pm: |
|
now that i have been thing about things. what kind of engine work should i get gone. of course head work and big bore. but in your guys opinion should i go for bolt on 1250 kit or go for a bigger case bore kit...i dont know anything about case boring so of course i will have that done a pro. |
Easy_rider
| | Posted on Sunday, June 05, 2011 - 12:35 am: |
|
I'll spout the "company line" here. Call a few sponsors of Badweb. There are plenty of folks at those businesses who make it there business to give you what you want. That being said, figure out what you want before you call them. Daily driver? Fast as possible in a straight line? Less than $2k? Less than $6k? The quest for more power becomes addictive and expensive. Have a general idea where you want to head and these guys will tell you how close you can come to getting there within budget. |
Snowbees
| | Posted on Sunday, June 05, 2011 - 04:12 am: |
|
If you have a 27 tooth front pulley, put a 29 tooth on, it will give you more 'leg'
You will loose a bit of acceleration but its hardly noticable. |
01x1buell
| | Posted on Monday, June 06, 2011 - 07:55 pm: |
|
what about a 30 tooth sprocket i found one really cheap.. would that be to much.., and does that effect the speedo in anyway??? |
Jramsey
| | Posted on Monday, June 06, 2011 - 09:52 pm: |
|
The 30 tooth sprocket will fit fine if you have a belt stretcher........ it should be in the same isle that bolt stretcher's are found.
Speedo runs off 5th gear, so yes there will be error......you do the math. |
01x1buell
| | Posted on Monday, June 06, 2011 - 09:58 pm: |
|
ok then chief!!!!!! |
Phelan
| | Posted on Tuesday, June 07, 2011 - 12:53 am: |
|
You should be able to gO to HD and have them correct the speedo thought right? Since the speedo sensor is an HD part...
One of the reasons I want an X1 motor in my S2 project is because the S2 has a cable speedo and with an XB front end, there's no way to hook up a speedo cable. |
Snowbees
| | Posted on Tuesday, June 07, 2011 - 05:21 am: |
|
you can buy adjustable speedo sensors on ebay or a speedo corrector box of tricks thats fitted to the wires between the sensor and speedo.
I run a standard belt with the 29 tooth pully. |
01x1buell
| | Posted on Tuesday, June 07, 2011 - 09:36 pm: |
|
i want to build bike up this winter . where and how can i get a turbo kit for an x1.. and whats the price range on that.. |
Phelan
| | Posted on Wednesday, June 08, 2011 - 01:08 am: |
|
Good luck, none are made any more. You'd have to find something used or custom. |
Brinnutz
| | Posted on Wednesday, June 08, 2011 - 01:10 am: |
|
One just sold on eBay brand new last week.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?Vi ewItem&item=250826372728&viewitem=&sspagename=STRK %3AMEWAX%3AIT |
Phelan
| | Posted on Wednesday, June 08, 2011 - 01:14 am: |
|
It says Buell but I have never ever seen a Pro charger on a Buell or XL. I have only seen them on Big Twins, as kits, which included custom Primary covers among other things. |
