| Author | Message | ||
     F_skinner |
What are the rear isolator torque values for the rear isolators? I am thinking 100 ft lbs for the center bolt going through the isolator and 75 ft lbs for the 3 side plate bolts. 719 200 4957 I had this written down but have lost a lot of reference material. Frank | ||
| F_skinner |
Disregard, found the values. 100 and 30. It seems the poor handling was a isolator pin that broke off the side plate. I can turn right again. Lucky I had another side plate. I guess I will not have to appear on the "s2 parts, hoarder show" since I was able to make use of the stash of parts...... At least that is what I will tell Lynn. | ||
| Ratbuell |
Frank - is this on the bike that nearly met the guardrail at Buelltoberfest? | ||
| F_skinner |
Joe, yes it is. I have been riding it to work and it is amazing how much better it handles. The center bolt (the 100 ft lbs of torque one) was loose as well. I do not know if it was loose because the retaining pin broke or the retaining pin broke because it was loose. |
