G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Southern_trendkill Posted on Friday, February 18, 2011 - 04:04 pm:        I have this extra threaded hole in my rear head, and I don't know what it is. It was there when I bought the bike, and it runs fine despite it, but I'd like to know what is supposed to be there. I've looked through the service manual, and I can't find any reference to it, and it doesn't show up in the pictures. Can anyone on here enlighten me? (Message edited by Southern_Trendkill on February 18, 2011)   Jramsey Posted on Friday, February 18, 2011 - 04:33 pm:        Its for the head temp sensor used on the fuel injected models X1 and S3. '01-'02 they were relocated to the center(down the chimney) of the head.   Southern_trendkill Posted on Friday, February 18, 2011 - 07:31 pm:        Alright, thanks for the help. Now, since I somehow have X1 heads on my M2, does that change any of the parts I need to use, and would that affect power output?   Jramsey Posted on Friday, February 18, 2011 - 08:19 pm:        Your M2 engine is the same as the X1-S3 other then being carb'd and milder cams.   Southern_trendkill Posted on Friday, February 18, 2011 - 10:42 pm:        Alright. I guess this will make installing a head temp sensor pretty easy now.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: