G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Koz5150 Posted on Tuesday, October 26, 2010 - 09:55 am:        I currently have PM rims on my bike and I have a set of stock rims I purchased awhile ago. I am planning on polishing and chroming the stock rims. However I am thinking that they had a different spacer or something. 1. Anyone know for sure, and if so does anyone got one they want to get rid of? 2. Are there any other parts I need to pick up? 3. Anything else I should upgrade while I am preping the rims or any tricks that would be helpful? Thanks   Easy_rider Posted on Tuesday, October 26, 2010 - 11:12 am:        There's something different with the rear rotor. Maybe an additional part on the PMs that you don't need for the standard wheel? I'll try to take a look tonight when I get home.   Brinnutz Posted on Tuesday, October 26, 2010 - 11:18 am:        PM wheels require a locknut for the rear rotor. Stock wheels do not, they bolt right to the wheel. Other than that difference, nothing afaik.   Pkforbes87 Posted on Tuesday, October 26, 2010 - 11:47 am:        Sweet, I'm not the only one who thinks cast wheels look better than PM! AFAIK, the only mounting difference is the rear rotor. You can easily move the rotor from your PM to cast wheel. The extra "carrier" piece that the PM wheel has can stay. It's not used on the cast wheel. You probably already know this, but the PM rear is 5.5" wide and the cast is 5". Manual calls for a 180 on the PM, 170 on the cast.   Koz5150 Posted on Tuesday, October 26, 2010 - 01:27 pm:        well, I have an extra rear disc, but I am thinking I may find another pulley. I think the stock wheels polished or chromed look way better then the PM's.   Buell_bert Posted on Tuesday, October 26, 2010 - 02:10 pm:        Yea whether early or later the PM's use a spacer/collar with a 6 bolt pattern. They usually come with them.   Firstbuell Posted on Tuesday, October 26, 2010 - 03:39 pm:        what're ya gonna do with all that new free time ? [NO more polishing!!]   Rex Posted on Tuesday, October 26, 2010 - 10:10 pm:        I traded my PM's off of my S2 for white regular Buell Wheels. they look good with the red bodywork and white frame. Basically fit right up. Traded some wheels on my97 m2 once. The earlier buells had the speedo on the front wheel, while the newer ones is on the motor. This will cause you some work   Phat_j Posted on Wednesday, November 03, 2010 - 08:06 pm:        koz, wanna sell me your pm's cheap? i'm putting my s2 back together after a lowside this summer and bent both wheels.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: