G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Sanchez Posted on Saturday, July 17, 2010 - 05:33 pm:        I'm replacing the intake seals on my 98 S1, and I notice the new seals (which came from the previous owner) don't look like the ones I just removed. The new ones seem to fit, but they lack the little extra lip at the top. Anyone have any insight?   Mmcustoms Posted on Saturday, July 17, 2010 - 08:39 pm:        there right i just put some in my m2 i think the lip is just from being clamped down   Ratbuell Posted on Sunday, July 18, 2010 - 11:27 pm:        Yep, they "smoosh" when installed. Lube 'em up before you install 'em, I usually dip my forefinger and thumb in clean oil and run the seal through them first to get it nice and wet. Keeps the seal from bunching up and leaking, and allows the collar to slide evenly into place on top of it.   Bluzm2 Posted on Tuesday, July 20, 2010 - 05:05 pm:        Go to Napa and get a tube of Sylglide (sp?). It will last for ever and works great. Seals last longer too. Brad   Fahren Posted on Tuesday, July 20, 2010 - 11:37 pm:        Sil-Glyde. Good idea!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: