G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Biknut Posted on Wednesday, June 09, 2010 - 01:44 am:        Does anyone know what size threads the banjo bolt has for a rear master cylinder on a 00-02 M2 rear master cylinder? The master cylinder is part # H0205.R 10x1 10x1.25 Something else?   Eboos Posted on Wednesday, June 09, 2010 - 04:13 pm:        10 x 1.25   Biknut Posted on Wednesday, June 09, 2010 - 07:01 pm:        Thanks for the reply. You are correct. I stopped by the hardware store today and figured out it is 10 x 1.25   Phelan Posted on Thursday, June 10, 2010 - 12:46 am:        Phillip, what are you doing on this forum and why are you asking about a Nissin M/C? Don't you have a PM 4 piston caliper on the rear of your XL?   Biknut Posted on Thursday, June 10, 2010 - 11:07 am:        I bought a set of Sideshots for my bike and in order to make them fit I'm going to need to junk my big old caveman XL rear master cylinder. I bought a rear master cylinder for a Buell M2 which is a lot smaller to try to use. A Harley dealer was having a close out and it was only $40 shipped.   Phelan Posted on Friday, June 11, 2010 - 10:09 pm:        arent you afraid the sideshots will kill all that power you just put in your motor?   Biknut Posted on Friday, June 11, 2010 - 10:26 pm:        I certainly hope not. Everyone says they're among the best 2:2 pipes because of the power chamber. They'll have to be pretty bad to be worse than my last two sets I've had on there. I haven't been able to find exhaust pipe happiness since my Hookers cracked to pieces. These look like they might be OK but I'm not too impressed with the look of the baffles. I'll probably need new Thunder Monsters before I'm through.   Phelan Posted on Friday, June 11, 2010 - 10:31 pm:        Are you not talking about V&H sideshots?   Biknut Posted on Friday, June 11, 2010 - 11:32 pm:        Yeah, I just bought some. That's why I need to change my master cylinder.   Phelan Posted on Sunday, June 13, 2010 - 09:20 am:        I'm just sayin, never seen anyone get over 88 RWHP with those. Remember CJburr? He had stage III heads, 1250, and those pipes, and only got 88 rwhp. He only switched to a bassani 2-1 and re-tune and it jumped to 103 rwhp. Dan calls them 85 HP pipes. (Message edited by Phelan on June 13, 2010)   Biknut Posted on Sunday, June 13, 2010 - 11:04 am:        I think he was running Shortshots, and he probably had baffles. That's about the best those pipes will do with baffles. Mine are Sideshots. They're more like a 2:1 becaused they're joined at the hip with a power chamber (balance tube).   Phelan Posted on Sunday, June 13, 2010 - 12:34 pm:        Whoops, my bad. I got them mixed up

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: