| Author | Message | ||
     Truth |
Hey all, I just picked up a rear shock for my 99 M2. The original shock had no rezzy, the replacement does. Where do you guys mount your rezzies? Thanks, Frank R. | ||
| Guell |
is it a stock shock? Mine mounted towards the front of the shock. If its an aftermarket one, like a works or a penske than anywhere on the frame | ||
| Jramsey |
The stock Showa mounts to the shock bracket with a T-Bolt hose clamp, the stud of the clamp goes thru a 1/4" hole in the bracket and the nut screws on from the regulator side. At the rear of the reservoir there should be a rubber saddle that goes between the reservoir and the oil pump outlet fitting and uses a standard hose clamp at this position. | ||
| Truth |
Thanks ramsey! It is a stock shock. The one that was on the bike prior did not have a rezzy. I will get the needed parts. Thanks! Frank. | ||
| Spiderman |
looks like this...  The rear worm clamp clamps around the oil line nut and a rubber bumper the front stainless 360 strap mounts through a hole in the front shock mount... | ||
| Truth |
Hey guys, I have been searching the net for a while... I have a headache now.. I can't find a single site with OEM parts fiche for Buells. Can anybody give me the part #s for the clamps I'll need to mount the Rezzy? I'd really appreciate it! Frank. |
