| Author | Message | ||
     The4ork |
was thinking about putting a bid on these.. but i wanna know if they are a good deal or not. also what else i would need to put them on my s1? http://cgi.ebay.com/ebaymotors/Nalin-stage-2-heads-for-a-xb-buell_W0QQitemZ160367582095QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item2556a71b8f (Message edited by the4ork on October 09, 2009) | ||
| Phelan |
Not a bad deal; you'd need the NRHS mount to put the XB heads on your S1 as the front mounting hole is 1/2" off from stock. You'll also need matching pistons. I can't tell from the pics whether or not the heads were cut for a squish band but you'd need to find out and get pistons that match the squish. Those heads stock came with 0* squish, so flat tops would be in order (unless going with higher compression). However, it is common, and the recommendation (if ordering new pistons as well), of NRHS to cut a 15* squish band in these heads to use with thunderstorm type pistons. | ||
| Brinnutz |
Which is it? Title of auction says stage 2, listing description says stage 3? Does this guy know what he's talking about? |
