| Author | Message | ||
     Illeagle |
    Rewired my whole bike. Added new gauge tach speedo shift light, Custom blinker switches mounted in the handle bar wires ran threw the bar, Dirt bike billet throttle custom steel braided cables, Hidden starter switch no more key,Teather kill, Intergrated rear blinkers in tail light. Alot of work but worth it. Got rid of a ton of wires and a clean look | ||
| Phelan |
what dash is that? It looks awesome. Good job on the bike. | ||
| Illeagle |
Phelon} It's A KOSO I like it because of the big tach and shift light. | ||
| Preybird1 |
Where is your mini duster that thing is filthy!  Why the tether kill switch? | ||
| Illeagle |
Preybird1} Yeah it's very dirty just put the bike back together no time to clean it.. Tether is for the race track, And I wanted a way to shut it off with out reaching for the hidden switches just in case something bad were to happen and I think it looks cool. | ||
| Ratbuell |
How hard was it to wire the tether kill? Getting ready to put my wife back on a bike - she's new and I'm sure it'll drop at least once. I'd like to know it's gonna shut off if she goes down (I don't think '01 M2's have a BAS, do they?). | ||
| Limitedx1 |
that is effin awesome! now if we could only get lever mounts without the mirror hole in them..... | ||
| Cyclonemick |
Where did the speedo and tach come from?? One of those would look great on my M2! | ||
| Pkforbes87 |
"Phelon It's A KOSO I like it because of the big tach and shift light." | ||
| Cyclonemick |
Duh!  Must have been sleepin, Thanks Pk! | ||
| Limitedx1 |
illeagle.....how hard was the wire up of that speedo on your bike? do all the function lights still work? would an x1 be much different? | ||
| Wile_ecoyote |
Nice work, clean and unobtrusive. | ||
| Illeagle |
here is a link to koso http://www.kosonorthamerica.com/ It's not to hard to wire up if you have some knowledge of wiring stuff up. everything works you have to buy a adapter for the speedo cable to screw into to convert to digital | ||
| Buellfighter |
Yes...what Wile said!! | ||
| Skntpig |
now if we could only get lever mounts without the mirror hole in them.....CGR Supersport Clutch  I don't have blinkers but need to get a small high/lo beam switch. What did you use for your blinkers? Now you got me thinking. Nice work! (Message edited by skntpig on May 21, 2009) | ||
| Bikertrash05 |
Very nice! That gives me an idea for my problem, the stock white plastic cable guide is getting quite worn. Then again, is yours still in decent condition, and would you sell? This thing:  | ||
| Illeagle |
Skntpig} I used lockhart minis up front and the back is built in the tail light led... Where did you get the clutch is it just the perch or a whole new set up? | ||
| Illeagle |
Bikertrash05} I have that somewhere I will look for it and let you know. How much is it worth? | ||
| Illeagle |
Skntpig} Sorry got your question wrong... The switches dont stay on unless you hold em on it wouldn't work for high beam unless you hold the switch. I like that I need to hold it for the blinkers I really don't use them much just wanted it to be legal for the cops......... | ||
| Skntpig |
The clutch perch comes as you see it. The whole thing. I bet you could just get the perch. I you can even adjust the ratio on the clutch for more or less pull. I had mine special ordered from Al at www.americansportbike.com You can check it out here: SUPERSPORT CLUTCHhttp://www.constructorsrg.com/levers/supersport.ht ml | ||
| Skntpig |
Maybe those switches won't work but hopefully the same company has something that will. Do you know who makes the switch? | ||
| Illeagle |
Skntpig}I got them from a friend I will ask him where he got them and let you know | ||
| Bikertrash05 |
I don't know how much it is worth, but I was told it isn't sold separately.  | ||
| Bikertrash05 |
I'll give $15 shipped via USPS Priority if you find it. LMK, thanks! -Jim |
