Author |
Message |
Lowroad
| Posted on Thursday, April 23, 2009 - 12:03 am: |
|
Anyone? |
Cyclonemduece
| Posted on Thursday, April 23, 2009 - 10:47 pm: |
|
for what bike dude? |
Tdman77
| Posted on Thursday, April 23, 2009 - 11:17 pm: |
|
Here are the part numbers I found for the X1 select seat. There are only a few left and I think only orange and yellow. No black or blue ones. I had to get an orange one and am in the process of dying the piping black. 51890-00y black piping 51892-00y blue piping 51893-00y orange piping 51894-00y yellow piping 51895-00y red piping 51896-00y onyx piping |
Lowroad
| Posted on Thursday, April 23, 2009 - 11:23 pm: |
|
yeah I tracked a couple down. Im going the dye route too. |
Pkforbes87
| Posted on Thursday, April 23, 2009 - 11:32 pm: |
|
just curious.. how much are the seats new? |
Tdman77
| Posted on Thursday, April 23, 2009 - 11:34 pm: |
|
Low - Make sure to use dye and not paint. I have used both and had very bad luck with the paint rubbing off. I have used VHT dye and had great results and will be using in on my new seat. It penetrates the vinyl/plastic and wont rub off, even if it is scuffed it will be the color you dyed it. PK - I got mine from Pikesvill HD in PA for around $250 shipped to my door. Like I said b4 get them now! There were less than 6 left in any color when I ordered mine on Monday. (Message edited by tdman77 on April 23, 2009) |
Lowroad
| Posted on Friday, April 24, 2009 - 11:13 am: |
|
got mine. Orange piping. Shipping from Colorado. $269.59 total. Thanks for the tip on the VHT dye. I was wondering what brand to use. I was considering the SEM from eastwood, but I'll go with the VHT now. |
Brinnutz
| Posted on Friday, April 24, 2009 - 11:25 am: |
|
There's a black one on ebay right now... |
Lowroad
| Posted on Friday, April 24, 2009 - 11:33 am: |
|
yeah, the "wear through" where the seat meets the tank concerns me quite a bit, and the guy expects more that the new ones are going for. I offered him $150 and he shot me down. He's hoping to get more than $200. I'd rather spend another $30 and get a brand new one. |
Cyclonemick
| Posted on Monday, April 27, 2009 - 09:15 am: |
|
will that dye work on a set of (vinyl??) Buell sadlebags? My black bags are faded and look like they are about 100 years old! |
Tdman77
| Posted on Monday, April 27, 2009 - 02:12 pm: |
|
Mick - The dye will work on any vinyl, plastic, synthetic fabric and even leather. I would test an area out of sight like the bottom or back side of the bag first. I have used VHT dyes on a lot of interior car parts from dash boards, door panels, seats, and even carpet. I just finished my new seat. I only dyed the piping since the rest of it was new. Looks great. Cant even tell that it had orange piping and an orange logo.
The logo was hand colored with a super fine sharpie pen. (Message edited by tdman77 on April 27, 2009) |
Lowroad
| Posted on Monday, April 27, 2009 - 02:33 pm: |
|
LOOKS GREAT! so you just masked off the piping real well and sprayed away? Also, did you use gloss or satin VHT dye? I ordered satin black already. |
Tdman77
| Posted on Monday, April 27, 2009 - 04:24 pm: |
|
Yes. I was really anal about masking the piping off, took me like an hour. When you spray, make sure to use light fogging coats or you will get runs under the tape. The dye tends to come out really heavy so test it on something to get the feel for it. After it was dry (the next day) I touched up the areas that the dye didn't get to with a sharpie. Just pull the piping back and you will see what I mean. When coloring the logo be sure to keep off the white areas and you will find that the color thread will wick the black but not get on the white threads. |
Lowroad
| Posted on Monday, April 27, 2009 - 04:42 pm: |
|
next weekends project. |
Tdman77
| Posted on Monday, April 27, 2009 - 08:24 pm: |
|
Oh yeah, the color is the satin black. I found that at first it will be a little glossy but dulls up a little over time. |
Lowroad
| Posted on Tuesday, April 28, 2009 - 12:07 am: |
|
perfect.
|
Lowroad
| Posted on Tuesday, April 28, 2009 - 11:56 pm: |
|
Got mine today! What a nice piece of kit, especially considering the Corbin costs about double, and honestly, I don't like it as much. |
Whitex102
| Posted on Wednesday, April 29, 2009 - 06:18 pm: |
|
Could you give a contact number for these seats? A PM would be OK. |
Lowroad
| Posted on Wednesday, April 29, 2009 - 06:19 pm: |
|
Any dealer can check the list of dealers nationally. |
Brinnutz
| Posted on Friday, November 06, 2009 - 11:15 am: |
|
I just ordered one for a buddy today for $190 shipped. Black piping. |