Author |
Message |
4dwuds
| Posted on Monday, February 23, 2009 - 10:45 am: |
|
I have a 97 M2 and there is no tach, Just the speedo. Later models have a speedo and tach. Is the wiring in place already on my 97 or will I have to wire up the tack if I add one. I am also wondering about a wider seat for my, shall we say wider seat. The present 2x4 is OK for moving it around in the garage but gets a little numbing after that. Will I have to change the seat and fender or will the wider seat just slip over the narrow fender I already have. (Message edited by 4DWUDS on February 23, 2009) |
Guell
| Posted on Monday, February 23, 2009 - 11:12 am: |
|
you need the bigger rear plastic for the wider seat. I wouldnt hesitate to go to it, i did and am very happy with it. Also, the manta tank is required for it to look right. I put a s1 tach housing on my m2, and it worked out ok. All the wiring is there in the main harness so if you have the right clips its plug and play. The later m2 tach upgrades will not work on your 97, ive tried. |
4dwuds
| Posted on Monday, February 23, 2009 - 11:25 am: |
|
Manta Tank ? |
Guell
| Posted on Monday, February 23, 2009 - 07:17 pm: |
|
The bigger one, it holds 5 gallons |
4dwuds
| Posted on Monday, February 23, 2009 - 08:40 pm: |
|
5 gallons, well lets see, at 50 mpg that would give me a 250 mile range or about 3 straight hours in the saddle, I sure hope that bigger seat is up to the task. Right now 30 minutes is my range. |
Guell
| Posted on Monday, February 23, 2009 - 08:57 pm: |
|
Ive done all day on the bike with the bigger saddle, no problems! |
4dwuds
| Posted on Monday, February 23, 2009 - 10:50 pm: |
|
Will just the M2 pieces fit or will a S model also work ? |
|